Proline Promass 83E/F/O Description of Device Functions - FMC ...
Proline Promass 83E/F/O Description of Device Functions - FMC ...
Proline Promass 83E/F/O Description of Device Functions - FMC ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5 Block USER INTERFACE <strong>Device</strong> <strong>Functions</strong> <strong>Proline</strong> <strong>Promass</strong> 83<br />
Function description<br />
USER INTERFACE INFORMATION LINE MULTIPLEX<br />
ASSIGN<br />
(continued)<br />
Advanced options with optional s<strong>of</strong>tware package CONCENTRATION:<br />
TARGET MASS FLOW<br />
% TARGET MASS FLOW<br />
TARGET VOLUME FLOW<br />
% TARGET VOLUME FLOW<br />
CORRECTED TARGET VOLUME FLOW<br />
CARRIER MASS FLOW<br />
% CARRIER MASS FLOW<br />
CARRIER VOLUME FLOW<br />
% CARRIER VOLUME FLOW<br />
CORRECTED CARRIER VOLUME FLOW<br />
% BLACK LIQUOR<br />
°BAUME<br />
°API<br />
°PLATO<br />
°BALLING<br />
°BRIX<br />
OTHERS (_ _ _ _ flexible concentration)<br />
Advanced options with optional s<strong>of</strong>tware package ADVANCED DIAGNOSIS:<br />
MASS FLOW DEVIATION<br />
DENSITY DEVIATION<br />
REFERENCE DENSITY DEVIATION<br />
TEMPERATURE DEVIATION<br />
TUBE DAMPING DEVIATION<br />
ELECTRODYNAMIC SENSOR DEVIATION<br />
OPERATING FREQUENCY FLUCTUATION DEVIATION<br />
TUBE DAMPING FLUCTUATION DEVIATION<br />
! Note!<br />
Multiplex mode is suspended as soon as a fault / notice message is generated. The<br />
message in question appears on the display.<br />
• Fault message (identified by a lightning icon):<br />
– If “ON” was selected in the ACKNOWLEDGE FAULTS (8004)<br />
function, multiplex mode is continued as soon as the fault has been acknowledged<br />
and is no longer active.<br />
– If “OFF” was selected in the ACKNOWLEDGE FAULTS (8004)<br />
function, multiplex mode is continued as soon as the fault is no longer active.<br />
• Notice message (identified by an exclamation mark):<br />
– Multiplex mode is continued as soon as the notice message is no longer active.<br />
100% VALUE<br />
(2621) ! Note!<br />
This function is not available unless one <strong>of</strong> the following was selected in the ASSIGN<br />
function (2620):<br />
• MASS FLOW IN %<br />
• VOLUME FLOW IN %<br />
• CORRECTED VOLUME FLOW IN %<br />
• MASS FLOW BARGRAPH IN %<br />
• VOLUME FLOW BARGRAPH IN %<br />
• CORRECTED VOLUME FLOW BARGRAPH IN %<br />
Use this function to define the flow value to be shown on the display as the 100% value.<br />
User input:<br />
5-digit floating-point number<br />
Factory setting:<br />
10 kg/s, 10 l/s or 10 Nl/s<br />
Page 54 • MN0M023<br />
Issue/Rev. 0.2 (12/12)