Proline Promass 83E/F/O Description of Device Functions - FMC ...

More documents

Recommendations

Info

5 Block USER INTERFACE Device Functions Proline Promass 83 Function description USER INTERFACE INFORMATION LINE CONFIGURATION FORMAT (2602) ! Note! This function is not available unless a number was selected in the ASSIGN function (2600). Use this function to define the maximum number of places after the decimal point displayed for the reading in the information line. Options: XXXXX. - XXXX.X - XXX.XX - XX.XXX -X.XXXX Factory setting: X.XXXX ! Note! • Note that this setting only affects the reading as it appears on the display, it has no influence on the accuracy of the system's calculations. • The places after the decimal point as computed by the measuring device cannot always be displayed, depending on this setting and the engineering unit. In such instances an arrow appears on the display between the measuring value and the engineering unit (e.g. 1.2 kg/h), indicating that the measuring system is computing with more decimal places than can be shown on the display. DISPLAY MODE (2603) ! Note! This function is not available unless one of the following was selected in the ASSIGN function (2600): • MASS FLOW BARGRAPH IN % • VOLUME FLOW BARGRAPH IN % • CORRECTED VOLUME FLOW BARGRAPH IN % Use this function to define the format of the bar graph. Options: STANDARD Simple bar graph with 25 / 50 / 75% gradations and integrated sign. A0001258 SYMMETRY Symmetrical bar graph for positive and negative directions of flow, with –50 / 0 / +50% gradations and integrated sign.. A0001259 Factory setting: STANDARD Page 52 • MN0M023 Issue/Rev. 0.2 (12/12)
Device Functions Proline Promass 83 5 Block USER INTERFACE 5.4.2 Function group MULTIPLEX USER INTERFACE C CONTROL CAA MAIN LINE CCA ADDITIONAL LINE CEA INFORMATION LINE CGA CONFIGURATION 260 MULTIPLEX 262 Function description USER INTERFACE INFORMATION LINE MULTIPLEX ! Note! If you select the BATCHING OPERATING KEYS in the function ASSIGN (2600), the multiplex display functionality is not available in the information line. ASSIGN (2620) Use this function to define the second reading to be displayed in the information line alternately (every 10 seconds) with the value defined in the function ASSIGN (2600). Options: OFF MASS FLOW MASS FLOW IN % VOLUME FLOW VOLUME FLOW IN % CORRECTED VOLUME FLOW CORRECTED VOLUME FLOW IN % DENSITY REFERENCE DENSITY TEMPERATURE MASS FLOW BARGRAPH IN % VOLUME FLOW BARGRAPH IN % CORRECTED VOLUME FLOW BARGRAPH IN % ACTUAL CURRENT (1...3) ACTUAL FREQUENCY (1...2) TOTALIZER (1...3) TAG NAME OPERATING/SYSTEM CONDITIONS DISPLAY FLOW DIRECTION ACTUAL CURRENT INPUT Factory setting: OFF (continued on next page) Issue/Rev. 0.2 (12/12) MN0M023 • Page 53
Page 1 and 2: Issue/Rev. 0.2 (12/12) Coriolis Mas
Page 3 and 4: Device Functions Proline Promass 83
Page 27 and 28: Esc Device Functions Proline Promas
Page 29 and 30: Esc Device Functions Proline Promas
Page 51: Device Functions Proline Promass 83
Page 103 and 104:
Device Functions Proline Promass 83
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
show all

Proline Promass 83E/F/O Description of Device Functions - FMC ...

Create successful ePaper yourself

Delete template?

Save as template?