Proline Promass 83E/F/O Description of Device Functions - FMC ...
Proline Promass 83E/F/O Description of Device Functions - FMC ...
Proline Promass 83E/F/O Description of Device Functions - FMC ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Device</strong> <strong>Functions</strong> <strong>Proline</strong> <strong>Promass</strong> 83<br />
5 Block USER INTERFACE<br />
5.3.2 Function group MULTIPLEX<br />
USER INTERFACE C CONTROL CAA<br />
<br />
MAIN LINE CCA<br />
<br />
ADDITIONAL LINE CEA CONFIGURATION 240<br />
<br />
MULTIPLEX 242<br />
Function description<br />
USER INTERFACE ADDITIONAL LINE MULTIPLEX<br />
ASSIGN<br />
(2420)<br />
Use this function to define the second reading to be displayed in the additional line<br />
alternately (every 10 seconds) with the value defined in the function ASSIGN (2400).<br />
Options (standard):<br />
OFF<br />
MASS FLOW<br />
MASS FLOW IN %<br />
VOLUME FLOW<br />
VOLUME FLOW IN %<br />
CORRECTED VOLUME FLOW<br />
CORRECTED VOLUME FLOW IN %<br />
DENSITY<br />
REFERENCE DENSITY<br />
TEMPERATURE<br />
MASS FLOW BARGRAPH IN %<br />
VOLUME FLOW BARGRAPH IN %<br />
CORRECTED VOLUME FLOW BARGRAPH IN %<br />
ACTUAL CURRENT (1...3)<br />
ACTUAL FREQUENCY (1...2)<br />
TOTALIZER (1...3)<br />
TAG NAME<br />
ACTUAL CURRENT INPUT<br />
Factory setting:<br />
OFF<br />
Advanced options with optional s<strong>of</strong>tware package BATCHING:<br />
BATCH NAME (“BATCH # 1” or “BEER 330”, etc.)<br />
BATCH QUANTITY (overall quantity to be batched)<br />
BATCH COUNTER (batching processes carried out)<br />
BATCH SUM (effective total batching quantity)<br />
BATCH UPWARDS (batching progress upwards)<br />
BATCH DOWNWARDS (batching progress downwards)<br />
! Note!<br />
The options given in the BATCHING s<strong>of</strong>tware package always refer to the batching<br />
selected (“BATCH # 1”, “BATCH # 2”, etc.) in the BATCH SELECTOR function<br />
(page 147). Example: If BATCH # 1 was selected in the BATCH SELECTOR function<br />
(7200), then only the values from BATCH # 1 (batch name, batch quantity etc.) can be<br />
displayed.<br />
(continued on next page)<br />
Issue/Rev. 0.2 (12/12) MN0M023 • Page 47