Proline Promass 83E/F/O Description of Device Functions - FMC ...
Proline Promass 83E/F/O Description of Device Functions - FMC ...
Proline Promass 83E/F/O Description of Device Functions - FMC ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Device</strong> <strong>Functions</strong> <strong>Proline</strong> <strong>Promass</strong> 83<br />
5 Block USER INTERFACE<br />
Function description<br />
USER INTERFACE ADDITIONAL LINE CONFIGURATION<br />
ASSIGN<br />
(continued) ! Note!<br />
The options given in the BATCHING s<strong>of</strong>tware package always refer to the batching<br />
selected (“BATCH # 1”, “BATCH # 2”, etc.) in the BATCH SELECTOR function<br />
(page 147). Example: If BATCH # 1 was selected in the BATCH SELECTOR function<br />
(7200), then only the values from BATCH # 1 (batch name, batch quantity etc.) can be<br />
displayed.<br />
Advanced options with optional s<strong>of</strong>tware package CONCENTRATION:<br />
TARGET MASS FLOW<br />
% TARGET MASS FLOW<br />
TARGET VOLUME FLOW<br />
% TARGET VOLUME FLOW<br />
CORRECTED TARGET VOLUME FLOW<br />
CARRIER MASS FLOW<br />
% CARRIER MASS FLOW<br />
CARRIER VOLUME FLOW<br />
% CARRIER VOLUME FLOW<br />
CORRECTED CARRIER VOLUME FLOW<br />
% BLACK LIQUOR<br />
° BAUME<br />
° API<br />
° PLATO<br />
° BALLING<br />
° BRIX<br />
OTHERS (_ _ _ _ flexible concentration)<br />
Advanced options with optional s<strong>of</strong>tware package ADVANCED DIAGNOSIS:<br />
MASS FLOW DEVIATION<br />
DENSITY DEVIATION<br />
REFERENCE DENSITY DEVIATION<br />
TEMPERATURE DEVIATION<br />
TUBE DAMPING DEVIATION<br />
ELECTRODYNAMIC SENSOR DEVIATION<br />
OPERATING FREQUENCY FLUCTUATION DEVIATION<br />
TUBE DAMPING FLUCTUATION DEVIATION<br />
100% VALUE<br />
(2401) ! Note!<br />
This function is not available unless one <strong>of</strong> the following was selected in the ASSIGN<br />
function (2400):<br />
• MASS FLOW IN %<br />
• VOLUME FLOW IN %<br />
• CORRECTED VOLUME FLOW IN %<br />
• MASS FLOW BARGRAPH IN %<br />
• VOLUME FLOW BARGRAPH IN %<br />
• CORRECTED VOLUME FLOW BARGRAPH IN %<br />
Use this function to define the flow value to be shown on the display as the 100% value.<br />
User input:<br />
5-digit floating-point number<br />
Factory setting:<br />
10 kg/s, 10 l/s or 10 Nl/s<br />
Issue/Rev. 0.2 (12/12) MN0M023 • Page 45
Change language