Proline Promass 83E/F/O Description of Device Functions - FMC ...

More documents

Recommendations

Info

5 Block USER INTERFACE Device Functions Proline Promass 83 5.1.2 Function group UNLOCKING/ LOCKING USER INTERFACE C CONTROL CAA BASIC CONFIGURATION 200 UNLOCKING/ LOCKING 202 Function description USER INTERFACE CONTROL UNLOCKING/ LOCKING ACCESS CODE (2020) All data of the measuring system are protected against inadvertent change. Programming is disabled and the settings cannot be changed until a code is entered in this function. If you press the O/S keys in any function, the measuring system automatically goes to this function and the prompt to enter the code appears on the display (when programming is disabled). You can enable programming by entering your personal code (Factory setting = 83, see function DEFINE PRIVATE CODE (2021)). User input: max. 4-digit number: 0 ...9999 ! Note! • Programming is disabled if you do not press a key within 60 seconds following automatic return to the HOME position. • You can also disable programming in this function by entering any number (other than the defined private code). • The Endress+Hauser service organization can be of assistance if you mislay your personal code. DEFINE PRIVATE CODE (2021) Use this function to specify a personal code for enabling programming in the function ACCESS CODE. User input: 0...9999 (max. 4-digit number) Factory setting: 83 ! Note! • Programming is always enabled with the code “0”. • Programming has to be enabled before this code can be changed. When programming is disabled this function is not available, thus preventing others from accessing your personal code. STATUS ACCESS (2022) ACCESS CODE COUNTER (2023) Use this function to check the access status for the function matrix. Display: ACCESS CUSTOMER (parameterization possible) LOCKED (parameterization disabled) Displays how often the customer code, service code or the digit “0” (code-free) has been entered to gain access to the function matrix. Display: max. 7-digit number: 0...9999999 Factory setting: 0 Page 38 • MN0M023 Issue/Rev. 0.2 (12/12)
Device Functions Proline Promass 83 5 Block USER INTERFACE 5.1.3 Function group OPERATION USER INTERFACE C CONTROL CAA BASIC CONFIGURATION 200 UNLOCKING/ LOCKING 202 OPERATION 204 Function description USER INTERFACE CONTROL OPERATION TEST DISPLAY (2040) Use this function to test the operability of the local display and its pixels. Options: OFF ON Factory setting: OFF Test sequence: 1. Start the test by selecting ON. 2. All pixels of the main line, additional line and information line are darkened for minimum 0.75 second. 3. Main line, additional line and information line show an “8” in each field for minimum 0.75 seconds. 4. Main line, additional line and information line show a “0” in each field for minimum 0.75 seconds. 5. Main line, additional line and information line show nothing (blank display) for minimum 0.75 second. When the test is completed, the local display returns to its initial state and the setting changes to OFF. Issue/Rev. 0.2 (12/12) MN0M023 • Page 39
Page 1 and 2: Issue/Rev. 0.2 (12/12) Coriolis Mas
Page 3 and 4: Device Functions Proline Promass 83
Page 27 and 28: Esc Device Functions Proline Promas
Page 29 and 30: Esc Device Functions Proline Promas
Page 37: Device Functions Proline Promass 83
Page 89 and 90:
Device Functions Proline Promass 83
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
show all

Proline Promass 83E/F/O Description of Device Functions - FMC ...

Create successful ePaper yourself

Delete template?

Save as template?