Proline Promass 83E/F/O Description of Device Functions - FMC ...

11 Block SUPERVISION Device Functions Proline Promass 83
11.1 Group SYSTEM
11.1.1 Function group CONFIGURATION
SUPERVISION J SYSTEM JAA CONFIGURATION 800
Function description
SUPERVISION SYSTEM CONFIGURATION
ASSIGN SYSTEM ERROR
(8000)
Use this function to view all system errors.
By selecting a certain system error, its error category can be changed in the subsequent
function ERROR CATEGORY (8001).
Options:
CANCEL
List of system errors
! Note!
• You can exit this function as follows: select “CANCEL” and confirm with F.
• A list of possible system errors is provided in the Operating Instruction
Operating Instructions Proline Promass 83, BA 059D/06/en/
ERROR CATEGORY
(8001) ! Note!
This function is only available if a system error has been selected in the function ASSIGN
SYSTEM ERROR (8000).
Use this function to define whether a system error triggers a notice message or a fault
message. If you select FAULT MESSAGES, all outputs respond to an error in accordance
with their defined error response patterns.
Options:
NOTICE MESSAGES (display only)
FAULT MESSAGES (outputs and display)
! Note!
Press the key F twice to call up the function ASSIGN SYSTEM ERROR (8000).
ASSIGN PROCESS ERROR
(8002)
Use this function to view all process errors.
By selecting an individual process error, its error category can be changed in the
subsequent function ERROR CATEGORY (8003).
Options:
CANCEL
List of process errors
! Note!
• You can exit this function as follows: select “CANCEL” and confirm with F.
• A list of possible process errors is provided in the Operating Instruction
Operating Instructions Proline Promass 83, BA 059D/06/en/
Page 180 • MN0M023
Issue/Rev. 0.2 (12/12)