Proline Promass 83E/F/O Description of Device Functions - FMC ...
Proline Promass 83E/F/O Description of Device Functions - FMC ...
Proline Promass 83E/F/O Description of Device Functions - FMC ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Device</strong> <strong>Functions</strong> <strong>Proline</strong> <strong>Promass</strong> 83<br />
10 Block SPECIAL FUNCTION<br />
10.3.8 Function group ELECTRODYNAMIC SENSORS<br />
SPECIAL FUNCTION H ADVANCED DIAGNOSIS HEA CONFIGURATION 740<br />
<br />
ACQUISITION 741<br />
<br />
MASS FLOW 742<br />
<br />
DENSITY 743<br />
<br />
REFERENCE DENSITY 744<br />
<br />
TEMPERATURE 745<br />
<br />
TUBE DAMPING 746<br />
<br />
ELEC.-DYN. SENSORS 747<br />
Function description<br />
SPECIAL FUNCTION ADVANCED DIAGNOSIS ELECTRODYNAMIC SENSORS<br />
REFERENCE VALUE<br />
ELECTRODYNAMIC<br />
SENSORS<br />
(7470)<br />
The reference value for the electrodynamic sensors appears on the display.<br />
Display:<br />
5-digit floating-point number<br />
ELECTRODYNAMIC<br />
SENSORS<br />
(7471)<br />
The measuring values for the electrodynamic sensors appear on the display.<br />
Display:<br />
5-digit floating-point number<br />
MINIMUM VALUE<br />
(7472)<br />
The lowest value <strong>of</strong> the electrodynamic sensors since the saved values were last reset<br />
appears on the display.<br />
Display:<br />
5-digit floating-point number<br />
MAXIMUM VALUE<br />
(7473)<br />
The highest value <strong>of</strong> the electrodynamic sensors since the saved values were last reset<br />
appears on the display.<br />
Display:<br />
5-digit floating-point number<br />
ELECTRODYNAMIC<br />
SENSOR HISTORY<br />
(7474)<br />
The last ten values <strong>of</strong> the electrodynamic sensors since the saved values were last reset<br />
appear on the display.<br />
Display:<br />
5-digit floating-point number<br />
ELECTRODYNAMIC<br />
SENSOR DEVIATION<br />
(7475)<br />
This function displays the deviation between the measuring values for the electrodynamic<br />
sensors and the reference values (FACTORY or USER), see page 166, selected in the<br />
function SELECT REFERENCE CONDITION (7402) is displayed.<br />
Display:<br />
5-digit floating-point number<br />
Issue/Rev. 0.2 (12/12) MN0M023 • Page 173