Proline Promass 83E/F/O Description of Device Functions - FMC ...
Proline Promass 83E/F/O Description of Device Functions - FMC ...
Proline Promass 83E/F/O Description of Device Functions - FMC ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
10 Block SPECIAL FUNCTION <strong>Device</strong> <strong>Functions</strong> <strong>Proline</strong> <strong>Promass</strong> 83<br />
10.3 Group ADVANCED DIAGNOSIS<br />
10.3.1 Function group CONFIGURATION<br />
SPECIAL FUNCTION H ADVANCED DIAGNOSIS HEA CONFIGURATION 740<br />
Function description<br />
SPECIAL FUNCTION ADVANCED DIAGNOSIS CONFIGURATION<br />
REFERENCE<br />
CONDITION USER<br />
(7401)<br />
Use this function to start determining the user reference status. The following values are<br />
determined:<br />
• MASS FLOW<br />
• DENSITY<br />
• REFERENCE DENSITY<br />
• TEMPERATURE<br />
• TUBE DAMPING<br />
• ELECTRODYNAMIC SENSORS<br />
• OPERATING FREQUENCY FLUCTUATION<br />
• TUBE DAMPING FLUCTUATION<br />
Options:<br />
CANCEL<br />
START<br />
Factory setting:<br />
CANCEL<br />
SELECT REFERENCE<br />
CONDITION<br />
(7402)<br />
Use this function to select the reference status which should be used to compare the<br />
advanced diagnosis parameters (see function ACQUISITION MODE (7410) on<br />
page 167).<br />
Options:<br />
FACTORY<br />
USER<br />
Factory setting:<br />
FACTORY<br />
WARNING MODE<br />
(7403)<br />
Use this function to determine whether a warning should be generated when there is a<br />
deviation between the reference status (FACTORY or USER, see function SELECT<br />
REFERENCE CONDITION (7402)) and the current measuring values.<br />
The values <strong>of</strong> the following functions are compared to the reference status :<br />
• MASS FLOW (7421)<br />
• DENSITY (7431)<br />
• REFERENCE DENSITY (7441)<br />
• TEMPERATURE (7451)<br />
• TUBE DAMPING (7461)<br />
• ELECTRODYNAMIC SENSORS (7471)<br />
• OPERATING FREQUENCY FLUCTUATION (7481)<br />
• TUBE DAMPING FLUCTUATION (7491)<br />
Options:<br />
OFF<br />
ON<br />
Factory setting:<br />
OFF<br />
Page 166 • MN0M023<br />
Issue/Rev. 0.2 (12/12)