Proline Promass 83E/F/O Description of Device Functions - FMC ...

Device Functions Proline Promass 83
10 Block SPECIAL FUNCTION
Function description
SPECIAL FUNCTION BATCHING FUNCTION INFORMATION
BATCHING TIME
(7283)
In this function, you can read the batching time for the current or completed batching
process, i.e. starting at 0 seconds, the time displayed increases until the batching process
is complete.
Application:
This BATCHING TIME refers to the batch quantity determined in the BATCH SUM
function for the current or last batching process.
Batch sum
Batch 1 Batch 2
Batch time
t (s)
0
100
Batch time
0
100
A0001170-en
Display:
max. 7-digit floating-point number
! Note!
• Behavior when controlling batching process via function BATCH PROCEDURE:
– STOP BATCHING TIME is not reset and stays at the current value.
– START BATCHING TIME is reset and starts with the value 0
– HOLD BATCHING TIME is not reset and stays at the current value.
– GO ON BATCHING TIME is not reset and continues updating on the basis of
the last time value
• The BATCHING TIME is also updated during the batching process
Issue/Rev. 0.2 (12/12) MN0M023 • Page 165