Proline Promass 83E/F/O Description of Device Functions - FMC ...
Proline Promass 83E/F/O Description of Device Functions - FMC ...
Proline Promass 83E/F/O Description of Device Functions - FMC ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
7 Block OUTPUTS <strong>Device</strong> <strong>Functions</strong> <strong>Proline</strong> <strong>Promass</strong> 83<br />
Function description<br />
OUTPUTS RELAY OUTPUT (1...2) OPERATION<br />
VALUE SIMULATION<br />
SWITCH POINT<br />
(4742)<br />
! Note!<br />
The function is not visible unless the function SIMULATION SWITCH POINT (4741) is<br />
active (= ON).<br />
Use this function to define the status <strong>of</strong> the relay output during the simulation. This value<br />
is used to test downstream devices and the measuring device itself. Depending on the<br />
relay configuration (as make or break contact) the following selections are available.<br />
Options:<br />
Relay output configured as normally open (make) contact:<br />
MAKE CONTACT OPEN<br />
MAKE CONTACT CLOSED<br />
Relay output configured as normally closed (break) contact:<br />
BREAK CONTACT OPEN<br />
BREAK CONTACT CLOSED<br />
" Caution!<br />
The setting is not saved if the power supply fails.<br />
Page 106 • MN0M023<br />
Issue/Rev. 0.2 (12/12)
Change language