Blackhawk by Proto Catalog - Pullers - Eoss.com

PULLERS.
FOR MULTIPLE APPLICATIONS.
Blackhawk by Proto ® gear and specialty pullers are available for automotive
and light industrial applications in a range of styles and sizes to meet your needs.

10" ADJUSTABLE GEAR PULLER
• 7 ton capacity.
• Heavy-duty.
• All parts are heat-treated for long life.
• Three-position jaws provide added versatility with extended reach capabilities.
• Power pitch threads on center screw allow for increased pulling power.
Max. Max. Center Screw
Item No. Spread Reach Capacity Size Weight
ET-1011 10" 9" 7 Tons .69" x 8.38" 4.84 lbs.
Pullers
7" ADJUSTABLE GEAR PULLER
• 5 ton capacity.
• A middle-range puller capable of handling a wide variety of applications.
• Yoke and jaws are drop-forged from alloy steel.
• All parts are heat-treated for long life.
• Two-position jaws for versatility.
• Power pitch threads on center screw allow for increased pulling power.
Max. Max. Center Screw
Item No. Spread Reach Capacity Size Weight
ET-1008 7" 5.50" 5 Tons .56" x 6.38" 2.18 lbs.
SMALL GEAR PULLER
• 2 ton capacity.
• Designed for pulling small gears, bearings and armature arbors.
• Power pitch threads on center screw allow for increased pulling power.
Max. Max. Center Screw
Item No. Spread Reach Capacity Size Weight
ET-1005 4" 3.50" 2 Tons .38" x 4.25" 0.98 lbs.
168
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

9" REVERSIBLE 2-JAW GEAR PULLER
• 7 ton capacity.
• Reversible arms provide thin grips at one end for application in restricted spaces;
slotted grips at the others.
• Incorporates automatic grip tightening.
Max. Max. Center Screw
Item No. Spread Reach Capacity Size Weight
ET-1010 9" 5.50" 7 Tons .69" x 8.38" 4.39 lbs.
Pullers
6" REVERSIBLE GEAR PULLER
• 5 ton capacity.
• Designed for removal of magneto and generator gears and bearings, timed gears,
pinions and other small parts.
• Incorporates automatic grip tightening.
Max. Max. Center Screw
Item No. Spread Reach Capacity Size Weight
ET-1007 6" 3.50" 5 Tons .56" x 6.38" 2.17 lbs.
8-IN-1 PULLER
• 2 ton capacity.
• Adapts to almost any application quickly and easily.
• Only 16 pieces make 8 different pullers.
• Choose 2- or 3-jaw configurations, long or short reach, wide or narrow jaws.
• Comes in a tough plastic organizer box.
Max. Max. Center Screw
Item No. Spread Reach Capacity Size Weight
ET-1170A 6" 5.50" 4 Tons .63" x 7.00" 3.61 lbs.
Toll Free Customer Service Number: 1-800-800-TOOL Visit us at...
Customer Service FAX Number: 1-770-648-9108 www.stanleyproto.com
169

TAPERED BEARING SPLINTERS
• Designed for the removal of bearings, thin-faced gears and cone-shaped gears.
• Beveled edge allows insertion behind pulleys, gears, or bearings where space
limitations preclude the use of a standard jaw puller.
• For bearing removal, we recommend these attachments be used in conjunction
with Blackhawk by Proto ® puller ET-1322 for ET-1205 only.
Item No. Min. Reach Max. Reach Weight
ET-1205 0 2.25" 1.11 lbs.
ET-1207 0 4.25" 5.07 lbs.
Pullers
BODY DENT PULLER
• Removes auto body creases and dents without disturbing upholstery, headliners
and body hardware.
• Removing inner panels of dented area is also eliminated.
• Punch or drill hole in dented panel, insert self-threading screw or hook and with a
few raps of the sliding hammer return metal to its original shape.
• Sturdy plastic handle and black oxide body.
Item No. Length Weight
ET-1710 13.00" 3.72 lbs.
PILOT BEARING PULLER
• Use for removing sleeve-type bearings from 1/2" to 1-1/4" inside diameters on
flywheels, pumps and generators.
• Turn the handle for quick adjustment and the center rod spreads in the alloy jaws
for a tight fit inside the gearing.
Item No. Max. Reach Spread Weight
ET-1068A 1.50" .50" to 1.25" 4.13 lbs.
170
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.

HEAVY-DUTY UNIVERSAL HUB PULLER
• For use where hub bolt circle does not exceed 7-1/2".
• Sliding arms are quickly adjusted to fit any hub, regardless of the number of
wheel studs used.
Item No. Bolt Circle Range Weight
ET-1156A 7.50" 9.57 lbs.
GEAR AND PULLEY PULLER
• Designed for pulling timing gears, bearings and races on generators and other parts
such as fan pulleys, etc.
• The slotted block permits a wide range of adjustments.
• The screw is long enough to reach through the crank hole and remove the fan pulley
without dismounting the radiator.
• Use with ET-1205 for push-pull operations.
Pullers
Item No. Screw Size Weight
ET-1322 6.00" 1.72 lbs.
BATTERY TERMINAL AND GENERATOR BEARING PULLER
• Designed to engage either below or on the the sides of the cable terminals and lift
even badly corroded terminals with no harm to the battery case or posts.
• The swivel allows its use as a generator bearing puller and magneto gear puller.
Item No.
ET-1071A
Weight
0.64 lbs.
Toll Free Customer Service Number: 1-800-800-TOOL Visit us at...
Customer Service FAX Number: 1-770-648-9108 www.stanleyproto.com
171

STEERING WHEEL PULLER
• Any steering wheel that is tapped to take cap screws can be easily removed with this
Steering Wheel Puller, for removing flanges, pulleys, etc.
• For use over a hollow shaft, a nipple is supplied to provide a base for the screw.
• Also includes adapters for Buick ® and Chrysler ® products (not shown.)
Item No.
ET-1328A
Weight
2.25 lbs.
Buick ® is a registered trademark of General Motors Corporation.
Chrysler ® is a registered trademark of Daimler Chrysler Corporation.
Pullers
HARMONIC BALANCER PULLER
• Designed for use on balancers, vibration dampers, pulleys or any gear with
tapped holes.
• The four slots in the yoke allow the use of this tool in either 2 or 3-hole applications.
• The floating swivel prevents damage to shaft ends.
• Included are the necessary side screws —
(3) 3/8" x 24 x 2"; (3) 5/16" x 18 x 2"; (2) 3/8" x 16 x 4";
(3) M8 x 1.25 x 80 mm; (3) M10 x 1.50 x 50 mm (not shown).
Item No.
ET-1330
Weight
2.71 lbs.
172
WARNING: WORK SAFELY WITH TOOLS WEAR SAFETY GOGGLES.