6. operating the zmv-p - Grass

More documents

Recommendations

Info

5. SHIPPING - START-UP 5-003-01 5-003-02 14 The star in your cabinet
5. SHIPPING - START-UP 5.3 Assembling the Machine 5.3.1 The machine is shipped unassembled. 1. Lay the frame gibs out correctly (back strip with the hose, the air socket directed towards the rear) on a suitable table or stand. 2. Slide the rigid sled up, clamping flush left Necessary tool: Necessary accessory: hexagon socket screw key SW 4 mm hexagon socket screw key SW 5 mm premounted 3. Slide the movable sled up - no clamping required. 4. Fasten lateral gibs Necessary tool: Necessary accessory hexagon socket screw key SW 5 mm hexagon socket screw M6 diameter 5 dowel pin 5. Attach the ends of the hose to the air inlet socket. 5.4 Installation at the Final Destination Site 5.4.1 Fastening to the worktable with the angle bracket, which is included in the shipment 5.4.2 Fix the foot pedal to the appropriate position on the floor 5.5 Setting the ZMV-p No setting is necessary because the frame and profile are preset. 5.6 Start-Up 5.6.1 Pneumatic connection The ZMV-p is provided with a 2 meter long air hose with a diameter of 6/3“. A Euro-Quick coupling is mounted according to the system in the destination country. • Lift the setting button of the maintenance unit up and turn it counterclockwise. • Connect the pneumatic compressed air with a quick coupling or a stop valve with ventilation. • Caution: The machine operator must always be able to disconnect the machine from the compressed air system within a maximum distance of 3 meters. • Lift the setting button of the maintenance unit up and turn clockwise. The manometer (pressure gauge) reads 5.5 - 6 bar ( 0.55 - 0.6 Mpa). Press the adjusting button down. The star in your cabinet 15
Page 1 and 2: OPERATING INSTRUCTIONS Grass ZMV-pr
Page 3 and 4: 1. GENERAL INFORMATION 1.1 Technica
Page 5 and 6: 2. SAFETY INFORMATION 2.1 Safety In
Page 7 and 8: The star in your cabinet NOTES
Page 9 and 10: 3. DESCRIPTION OF PRODUCTS 3.1 Usag
Page 11 and 12: 4. ZMV-P COMPONENTS DESCRIPTION 4.1
Page 13: 5. SHIPPING - START-UP 5.1 Shipping
Page 17 and 18: 6. OPERATING THE ZMV-P 6.1 Requirem
Page 19 and 20: 6. OPERATING THE ZMV-P 6.2.5 Settin
Page 23 and 24: 8. MISCELLANEOUS 8.1 Guarantee Cert
Page 25 and 26: 8. MISCELLANEOUS 8.2 Disposal Form
Page 27 and 28: 8. MISCELLANEOUS 8.3 Resale Form Se
Page 29 and 30: 8. MISCELLANEOUS 8.4 Questionnaire
Page 31 and 32: 8. MISCELLANEOUS 8.5 Questionnaire
Page 35 and 36: WORLDWIDE DISTRIBUTORS MDT Concret

6. operating the zmv-p - Grass

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?