6. operating the zmv-p - Grass

4. ZMV-P COMPONENTS DESCRIPTION
4.1 Description of Individual Components in an Overview (Illustration 4-001-01/02)
1. Frame
The sleds move on this frame. No adjustment is possible with a closed system.
2. Rigid sled
Forms the counter support for the pressure force.
3. Movable sled
Forms the counter support for pressure force and is adjustable by means of the clamping lever.
4. Stop bolts
For recording the back wall width dimension
5. Fixed stop with blade
Three continuously adjustable stops for serial production.
6. Stop for back wall
For various back wall heights which are adjustable by means of the clamping lever.
7. Stop for length
For various lengths which are adjustable by means of the clamping lever.
8. Side presser in front
To prevent the Zarge from turning out.
9. Side presser from upper front
To grip the work piece.
10. Side presser from upper rear
To grip the work piece, to adjust 150 mm of the length stop
11. Foot activated pedal with sealed cover
To release the clamping, reduce the cover to 10 mm / sec. speed.
Caution: May not be adjusted!
12. Maintenance unit
To set the working pressure and to drain the system.
The star in your cabinet
11