QDK PIC24/dsPIC-XC16 - Quantum Leaps
QDK PIC24/dsPIC-XC16 - Quantum Leaps
QDK PIC24/dsPIC-XC16 - Quantum Leaps
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1 Introduction<br />
This QP Development Kit (<strong>QDK</strong>) describes how to use the QP/C state machine framework with the<br />
Microchip <strong>PIC24</strong>/<strong>dsPIC</strong> MCUs/DSCs and the Microchip MPLABX IDE and the <strong>XC16</strong> compiler. The actual<br />
hardware/software used to test this <strong>QDK</strong> as shown in Figure 1 and described below:<br />
Figure 1: Microstick II board with TTL-RS232 transceiver<br />
Microstick II<br />
board with<br />
PKOB debugger<br />
User LED<br />
USB to PC<br />
(power + debugging)<br />
<strong>PIC24</strong>/<strong>dsPIC</strong><br />
device<br />
QS data<br />
to host PC<br />
TTL to RS232<br />
transceiver board<br />
The actual hardware/software used to test this <strong>QDK</strong> is described below (see Figure 1):<br />
1. Microchip Microstick II board [Microstick2] with <strong>PIC24</strong>FJ64GB002 or <strong>dsPIC</strong>33FJ128MC devices<br />
2. Microchip MPLABX® IDE v1.41 and <strong>XC16</strong> compiler v1.10<br />
3. QP/C 4.5.04 or higher<br />
Copyright © <strong>Quantum</strong> <strong>Leaps</strong>, LLC. All Rights Reserved.<br />
1 of 35
Change language