Third Quarter - SPE Thermoforming Division
Third Quarter - SPE Thermoforming Division
Third Quarter - SPE Thermoforming Division
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Achieve a sustainable balance<br />
of performance and cost.<br />
Enabled by QINNEX ® technology, UPES ® resin<br />
as an additive to polyolefi ns enables<br />
significant source reduction while increasing<br />
performance at no additional cost.<br />
Environmental Benefits<br />
UPES resin enables improved<br />
processability, material source<br />
reduction and energy savings.<br />
Up to 20% material source<br />
reduction<br />
More efficient machine usage<br />
Recyclable<br />
Improved Performance<br />
When used in thermoforming<br />
applications, UPES resin<br />
enhances the performance of<br />
difficult to mold parts -<br />
providing stronger, thinner and<br />
stiffer packaging solutions.<br />
Improved crush strength –<br />
by up to 140%<br />
33% faster forming rates<br />
Better part definition<br />
Shorter start-ups and reduced<br />
scrap rates<br />
Increased machine time<br />
availability<br />
Reduced Cost<br />
UPES resin helps thermoformers<br />
maintain a cost-competitive<br />
advantage while delivering<br />
material source reduction and<br />
improved performance.<br />
Downgauge<br />
Easy processability up to<br />
20% weight loadings<br />
No additional equipment<br />
needed<br />
Blends well with polyolefins<br />
No output/rate penalties<br />
NOVA Chemicals<br />
UPES@novachem.com | 724.770.6610 | www.upesresin.com<br />
UPES ® and QINNEX ® are registered trademarks of NOVA Chemicals Inc.<br />
is a trademark of NOVA Chemicals Inc.<br />
Visit our Booth 415<br />
September 18-20, 2010 Milwaukee, WI