8+ User manual - WowWee

introduction
Battery details
Installing or changing batteries in the Striker
The Striker requires 4 x “AA” size batteries (not included).
Your Striker will tell you when it’s time to change
batteries. When it detects critically low power during
gameplay, it will play a sound, flash white and power
down. Replace the batteries and toggle the ON/OFF
switch before using again.
To install or change the batteries:
1. Open the battery compartment using a
Phillips screwdriver (not included) to remove
the screws on the battery compartment
cover.
2. Insert the batteries according to the diagram.
Ensure that the positive and negative
polarities match the illustrations inside the
battery compartment.
3. Replace the battery compartment cover and
replace the screws using the screwdriver.
Do not over-tighten.
BARREL
1.5V “AA”
LR 6 / UM3
1.5V “AA”
LR 6 / UM3
1.5V “AA”
LR 6 / UM3
1.5V “AA”
LR 6 / UM3
6V
Installing or changing batteries in the
Mini Target
The Mini Target requires 3 x “AAA” size batteries
(not included). To install or change the
batteries:
1. Open the battery compartment
using a Phillips screwdriver (not
included) to remove the screw on
the battery compartment cover.
2. Insert the batteries according
to the diagram. Ensure that the
positive and negative polarities
match the illustrations inside the
battery compartment.
3. Replace the battery compartment
cover and replace the screw using
the screwdriver. Do not
over-tighten.
6
1.5V LR03
UM4 “AAA”
1.5V LR03
UM4 “AAA”
1.5V LR03
UM4 “AAA”
4.5V