Safety Manual for the Robomow RM 200 (PDF - Connox

More documents

Recommendations

Info

Warnings Decal Definitions These are the symbols on Robomow ® ; Read them carefully before operating Robomow ® . Safety alerts symbol – WARNING - this is a dangerous power tool. Use care when operating and follow all safety instructions and warnings. Read operator’s manual – Read user instructions before operating your Robomow ® Hazard of Thrown or flying objects - Whole body exposure, take caution. Keep a safe distance from the machine when operating Keep people in particular children, pets and bystanders away from the area in which Robomow is being used. Severing of toes or fingers - Rotary mower blade Risk of injury from rotating cutting blade. Keep hands and feet away and do not attempt to lift Robomow from this area. Remove the disabling device before working on or lifting Robomow ® . Remove the battery fuse before working on or lifting Robomow ® . EC Conformity This product conforms to the applicable EU Directives Disposal of old Electrical & Electronic Equipment Do not dispose Robomow ® or any other part of it as unsorted municipal waste – instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. 6 and
Robomow ® Safety Features 1. Child Guard / Safety Guard (Level I) This menu option offers a safety feature to help prevent children or others not familiar with the safe operation of the mower to operate it freely. 2. Anti-Theft / Safety Guard (level II) The anti-theft system provides the user a disabling function that will prevent anyone from using or driving the Robomow unless they have the valid code to enter. You will be prompted to enter a fourdigit code of your choice to use as your personal security code. 3. Lift Sensor There is Hall-Effect Sensor (Magnetic Position Sensor) located in the front side of Robomow. In case the front of the mower is raised approximately 1-inch from its resting position on the ground during blade operation, the blade will immediately stop rotating (< 1 second). 4. Tilt Sensor There is an optical sensor located in the front side of Robomow. In case the front of the mower is lifted up towards a vertically position, the blade will stop immediately and Robomow will warn about it and instruct the user to remove the fuse before lifting Robomow. 5. Bumper Sensor The bumper is equipped with Hall effect sensor activate when the mower strikes a solid, fixed object and when the bumper cover is open. When the bumper sensor is activated, the mower will stop the rotation of the blade immediately (
Page 1 and 2: Operating & Safety Manual RM200 www
Page 3 and 4: 3 Table of Contents Safety Warnings
Page 5: Transport To safely move from or wi
Page 9 and 10: What’s in the Box Open the box an
Page 11 and 12: 11 1.2.2 Placing The Perimeter Swit
Page 13 and 14: While the picture shows two wires s
Page 15 and 16: 1.3.2 Laying Out The Perimeter Wire
Page 17 and 18: � Press the ‘ON’ button. A sm
Page 19 and 20: 19 Press ‘GO’ ‘ GO’ to test
Page 21 and 22: 2.1 Zones setup The ‘Zones setup
Page 23 and 24: 23 2.3 Information The ‘Informati
Page 25 and 26: Chapter 3 - Operation and Charging
Page 27 and 28: Chapter 4 - Text Messages and Troub
Page 29 and 30: 29 Message Displayed Low temperatur
Page 31 and 32: 31 4.2 Other Operational or Fault P
Page 33 and 34: WARNING! Chapter 5 - Maintenance an
Page 35 and 36: 5.5 Splicing the Perimeter Wire If
Page 37 and 38: 37 Chapter 7 - Accessories Blade Ke
Page 39 and 40: Friendly Robotics RM Series Limited

Safety Manual for the Robomow RM 200 (PDF - Connox

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?