Safety Manual for the Robomow RM 200 (PDF - Connox
Safety Manual for the Robomow RM 200 (PDF - Connox
Safety Manual for the Robomow RM 200 (PDF - Connox
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
19<br />
Press ‘GO’ ‘ GO’ to<br />
test<br />
wire position<br />
Walk along <strong>the</strong> side of <strong>the</strong><br />
R obomow while it is following<br />
th e edge until completing one<br />
lope of <strong>the</strong> perimeter without<br />
striking any object (it will stay<br />
in <strong>the</strong> Base Station).<br />
Wire position<br />
Press GO to test<br />
Wire position<br />
Figure 1.25<br />
Testing <strong>the</strong> Wire Position<br />
<strong>Robomow</strong> collides<br />
with obstacle, drives<br />
back and stops Adjust wire<br />
Adjust <strong>the</strong> wire and press ‘ GO’ t o<br />
continue testing <strong>the</strong> wire position<br />
<strong>the</strong>n press GO<br />
1.5 Completing The Wire Fastening<br />
Once complete, walk back along <strong>the</strong> perimeter and add in wire pegs to those areas of <strong>the</strong> wire where<br />
it is not pulled down below <strong>the</strong> level of <strong>the</strong> grass tips and close to ground level. Wherever <strong>the</strong> wire is<br />
raised or loose, it should be tightened and pegged down with extra wire pegs (distance between<br />
pegs should be 0.5 to 1 meter in straight line and more when curved).