User Guide Product(range) - Neopost
User Guide Product(range) - Neopost
User Guide Product(range) - Neopost
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pos: 61.7 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Printer Driver & Cables to PC/TCP /IP (619)/7.X.X_Ü3_Direct ethernet connection between the printer and the PC_ONLY_619 @ 3\mod_1289307250494_912.doc @ 28152 @ 32<br />
Hinweis<br />
Checking the printer’s network settings<br />
You can always check the printer’s current IP address, Port number,<br />
subnet mask, gateway and the MAC address in this printer menu:<br />
SERVICE > CONFIGURAT. INFO<br />
Figure 49: Test of fix IP (ping test on server)<br />
4. Configure<br />
network<br />
settings (PC)<br />
and install<br />
printer driver<br />
• It is not necessary to change any network settings on the PC used<br />
to send data to the printer, given that the PC is working within the<br />
same LAN as the printer.<br />
• Install and configure the printer driver for your printer model as<br />
described in chapter 7.1 on page 79.<br />
7.4.4 Direct Ethernet connection between the printer and the PC<br />
1. Connect the<br />
printer to the<br />
PC with an<br />
Ethernet cable<br />
• Connect the printer to the PC with the Ethernet cable.<br />
Insert one Ethernet connector of the cable into the Ethernet<br />
interface of the printer and insert the other connector into the<br />
interface of your PC.<br />
2. TCP/IP<br />
interface<br />
configuration<br />
of the printer<br />
• Open the main menu of the printer with the Home key.<br />
• Open the menu PRINTER CONFIG. > BOOT DEFAULTS ><br />
COMMUNICATION > TCP/IP.<br />
• In this menu select the setting fix IP. This is the required setting<br />
for a direct Ethernet connection between printer and PC.<br />
<strong>User</strong> Manual Version 3.1 89