User Guide Product(range) - Neopost
User Guide Product(range) - Neopost
User Guide Product(range) - Neopost
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Hinweis<br />
2. Enter/<br />
change the<br />
default<br />
settings<br />
• Confirm any changes to the port number by pressing the Ok<br />
key. Now press the Cancel key until the main view is shown in<br />
the display.<br />
• Press the Ok key to turn the printer online. The bottom line of<br />
the display must now show: OnlinTCP<br />
3. Configure<br />
LAN settings<br />
(server<br />
settings)<br />
The printer is set to a fixed IP address<br />
• Please check that the printer’s IP address is valid within your LAN.<br />
• Please check that the printer’s IP address is not already used in<br />
your LAN.<br />
• Please check that the printer’s IP address can be detected (ping<br />
test) within your LAN. See Figure 49 for an example of such a test.<br />
In this sample the printer was set to a fix IP address<br />
(192.168.1.34). This IP was detected successfully by the server.<br />
The printer is set to dynamic IP address<br />
• It is recommended to use a fixed DHCP (Dynamic Host<br />
Configuration Protocol) table on your server to assign one specific<br />
IP address to the printer.<br />
Therefore you need to lock up the MAC address of the printer. You<br />
can lock up the printer’s MAC address either on your server of in<br />
the following printer menu: SERVICE > CONFIGURAT. INFO<br />
See Figure 48 for an example of such a DHCP table on a server. In<br />
this sample the printer with the MAC address 34 D2 C4 00 00 08<br />
was assigned to the IP address 192.168.1.34. This setup makes<br />
sure that the IP address assigned to the printer will always be the<br />
same.<br />
• Please check that the printer’s IP address can be detected (ping<br />
test) within your LAN.<br />
• Please check in the printer menu that the IP address shown there<br />
matches the one set on your server (SERVICE > CONFIGURAT.<br />
INFO).<br />
Figure 48: DHCP Table on server<br />
Using the printer within a LAN<br />
It is necessary to assign one specific IP address to the printer within the<br />
network. Since this one specific IP address needs to be entered in the<br />
configuration of the printer driver.<br />
88 <strong>User</strong> Manual Version 3.1