User Guide Product(range) - Neopost

More documents

Recommendations

Info

Pos: 61.6 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Printer Driver & Cables to PC/TCP /IP (619)/7.2.1_Ü3_Connecting the printer to a network_ONLY_619 @ 3\mod_1289307329445_912.doc @ 28163 @ 3344 Figure 47: Address printer port settings 7.4.2 Connecting the printer to a local area network Configuration of network settings To connect the printer to a LAN it is necessary to perform certain configurations on the server of your LAN. Please contact your company’s network administrator for support. Connect the printer to the LAN • Connect the printer to the LAN with the Ethernet cable Insert one Ethernet connector of the cable into the Ethernet interface of the printer and insert the other connector into an Ethernet port of the LAN. • Configure the TCP/IP interface of the printer. There are two options for the configuration of the printer’s TCP/IP interface: • Fix IP • Dynamic IP Please read the descriptions for these two options below and choose the one the fits best to your network. 86 <strong>User</strong> Manual Version 3.1
7.4.3 Using a fixed IP address 1. Printer settings “fix IP” • Open the main menu of the printer with the Home key. • Open the menu PRINTER CONFIG. > BOOT DEFAULTS > COMMUNICATION > TCP/IP. • In this menu select the setting fix IP. In the next menu you can set the values for Port Number, IP Address, Subnet Mask and Gateway IP Address. Port number IP Address Subnet Mask Gateway IP Address The default port 9100 is commonly used by printers. Please make sure that this port is not blocked in your LAN or use a port number that is accessible in your LAN. Please enter an IP address that is valid with your LAN. Please enter the Subnet Mask of your LAN. Please enter the IP address of the server of your LAN. 2. Enter/ change the default settings • The printer default values are shown below. Port Number: 9100 IP Address: 192.168.50.180 Subnet Mask: 255.255.255.0 Gateway IP Address: 192.168.50.180 • Confirm any changes to the values by pressing the Ok key. Now press the Cancel key until the main view is shown in the display. • Press the Ok key to turn the printer online. The bottom line of the display must now show: OnlinTCP 7.4.3.1 Using a dynamic IP address 1. Printer settings “dynamic IP” • Open the main menu of the printer with the Home key. • Open the menu PRINTER CONFIG. > BOOT DEFAULTS > COMMUNICATION > TCP/IP. • In this menu select the setting dynamic IP. • In the next menu you can set the value for the Port Number. Port number The default port 9100 is commonly used by printers. Please make sure that this port is not blocked in your LAN or set to a port number that is used in your LAN. <strong>User</strong> Manual Version 3.1 87
Page 1 and 2:
as-930 aDDress PrInTer User ManUal
Page 3 and 4:
Pos: 3 /[Allgemeines]/0.0a_Note_Tra
Page 5 and 6:
6 Printer menu (firmware V4.8).....
Page 7 and 8:
Table of Figures Figure 1:AS-930 Ov
Page 9 and 10:
Pos: 8 /Bedienungsanleitungen/Gerä
Page 11 and 12:
Pos: 13 /Bedienungsanleitungen/Ger
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
2: Ink costs and ink range This lin
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
fixing screws lift those separation
Page 31 and 32:
Page 33 and 34:
wing screw print area Figure 14: Po
Page 35 and 36: Pos: 53 /Bedienungsanleitungen/Ger
Page 39 and 40: JOB PARAMETERS.....................
Page 41 and 42: Pos: 60.3 /Bedienungsanleitungen/Ge
Page 45 and 46: MAIN MENU The Home key opens the ma
Page 47 and 48: KEEP ALIVE Here you can turn on the
Page 49 and 50: Pos: 60.23 /Bedienungsanleitungen/G
Page 67 and 68: LED/Beeper Here you can check if al
Page 71 and 72: Pos: 60.109 /Bedienungsanleitungen/
Page 81 and 82: 2. Connect the PC to the printer
Page 85: Correct IP address syntax Don’t e
Page 125 and 126: Pos: 85 /Serviceanleitungen/Geräte
Page 127 and 128: Pos: 90 /Zubehör/Generelles Zubeh
Page 137 and 138:
11.4 How to test the Ethernet conne
Page 139 and 140:
11.5 Network connection between the
Page 141 and 142:
Page 143 and 144:
11.7 How to create a print file Dep
Page 145 and 146:
Pos: 100 /Serviceanleitungen/Gerät
Page 147 and 148:
4 • Enable “Send to printer”
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
12 Glossary Term Addressing ASCll B
Page 155 and 156:
Font inclination Font type HP TIJ 2
Page 157 and 158:
Printer Driver Printhead Printhead
Page 159 and 160:
13 Index Accessories ..............
Page 161:
9204019U-B edition 08/04/2011 - 920
show all

User Guide Product(range) - Neopost

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?