User Guide Product(range) - Neopost

More documents

Recommendations

Info

Pos: 60.25 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Menü_Drucker_Warning_Factroy_setting @ 1\mod_1259054235982_912.doc @ 7641 @ Pos: 60.26 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü2/Ü2_1500_BOOT_DEFAULTS @ 0\mod_1254483976902_912.doc @ 4057 @ Pos: 60.27 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Menü_Drucker_Hinweis_BOOT DEFAULTS settings remain after printer reset @ 2\mod_1275288488760_912.doc @ 17703 @ Pos: 60.28 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_1504_PC PROGRAMM @ 0\mod_1254489913867_912.doc @ 4168 @ ADJUST TOF The “Top of form” (TOF) sensor or paper sensor detects the edge of every fed paper and controls the timing of the print heads. To ensure a correct positioning of the printed image an adjustment value is set in this menu. To make an adjustment press Quick + (Test Print). The AS-930 will now print an adjustment page with the one print cartridge, closest to the feeder. Measure the distance between the paper edge and the printed bars. See Figure 23 below. Enter the measured distance in the printer menu and press the Ok button. Figure 23: ADJUST TOF test print Factory setting This is a default setting, entered at the initiation of the machine in the factory. The user should change this setting only in case of a printer malfunction and after consulting a technician. BOOT DEFAULTS All settings made in this menu apply for all print jobs and are retained after switching off the printer. • Select BOOT DEFAULTS in the PRINTER CONFIG. menu and hit the Ok key. You will be presented the following choices: BOOT DEFAULTS settings remain after printer reset The settings in the BOOT DEFAULTS menu cannot be changed by resetting the machine (neither by a "Non-Mechanical Reset" nor by a "Defaul Reset"). The boot default settings have to be changed in the BOOT DEFAULTS menu. 50 <strong>User</strong> Manual Version 3.1
Pos: 60.29 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_1506_UNIT of MEASUREM. @ 0\mod_1254489917899_912.doc @ 4172 @ Pos: 60.30 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_1515_COMMUNICATION_ONLY_619 @ 3\mod_1283333962340_912.doc @ 27443 @ Pos: 60.31 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_1517_PAGE DATA SIZE_FROM_FW_4.8 @ 3\mod_1297871830429_912.doc @ 30350 @ PC PROGRAM Some applications require that you set this option to special. Option standard special Note For Microsoft Windows applications For Cobra, Oracle user Default: standard UNIT of MEASUREM. Here you can choose between „millimeter“ and „inch[feet/min]“ as unit of length. All length and size settings in the printer will be displayed in the unit set in the menu. COMMUNICATION This feature is used to select the interface used for the communication between the printer and the PC. Select the interface and press the Ok key. Option USB TCP/IP dynamic IP fix IP Note The USB interface will be used. The TCP/IP interface will be used. dynamic IP Port Number Default: 9100 fix IP Port Number Default: 9100 IP Address Default: 192.168.50.180 Subnet Mask Default: 255.255.255.000 Gateway IP Address Default: 192.168.50.252 Default: USB <strong>User</strong> Manual Version 3.1 51
Page 1 and 2: as-930 aDDress PrInTer User ManUal
Page 3 and 4: Pos: 3 /[Allgemeines]/0.0a_Note_Tra
Page 5 and 6: 6 Printer menu (firmware V4.8).....
Page 7 and 8: Table of Figures Figure 1:AS-930 Ov
Page 9 and 10: Pos: 8 /Bedienungsanleitungen/Gerä
Page 11 and 12: Pos: 13 /Bedienungsanleitungen/Ger
Page 23 and 24: 2: Ink costs and ink range This lin
Page 29 and 30: fixing screws lift those separation
Page 33 and 34: wing screw print area Figure 14: Po
Page 39 and 40: JOB PARAMETERS.....................
Page 41 and 42: Pos: 60.3 /Bedienungsanleitungen/Ge
Page 45 and 46: MAIN MENU The Home key opens the ma
Page 47 and 48: KEEP ALIVE Here you can turn on the
Page 49: Pos: 60.23 /Bedienungsanleitungen/G
Page 53 and 54: Pos: 60.34 /Bedienungsanleitungen/G
Page 67 and 68: LED/Beeper Here you can check if al
Page 71 and 72: Pos: 60.109 /Bedienungsanleitungen/
Page 81 and 82: 2. Connect the PC to the printer
Page 85 and 86: Correct IP address syntax Don’t e
Page 87 and 88: 7.4.3 Using a fixed IP address 1. P
Page 101 and 102:
Pos: 77 /Bedienungsanleitungen/Ger
Page 103 and 104:
Pos: 78.4 /Bedienungsanleitungen/Ge
Page 105 and 106:
Page 107 and 108:
Pos: 78.18 /Bedienungsanleitungen/G
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Pos: 85 /Serviceanleitungen/Geräte
Page 127 and 128:
Pos: 90 /Zubehör/Generelles Zubeh
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
11.4 How to test the Ethernet conne
Page 139 and 140:
11.5 Network connection between the
Page 141 and 142:
Page 143 and 144:
11.7 How to create a print file Dep
Page 145 and 146:
Pos: 100 /Serviceanleitungen/Gerät
Page 147 and 148:
4 • Enable “Send to printer”
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
12 Glossary Term Addressing ASCll B
Page 155 and 156:
Font inclination Font type HP TIJ 2
Page 157 and 158:
Printer Driver Printhead Printhead
Page 159 and 160:
13 Index Accessories ..............
Page 161:
9204019U-B edition 08/04/2011 - 920
show all

User Guide Product(range) - Neopost

Create successful ePaper yourself

Delete template?

Save as template?