User Guide Product(range) - Neopost
User Guide Product(range) - Neopost
User Guide Product(range) - Neopost
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Pos: 96.4 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Printer Driver & Cables to PC/USB 2.0 (619)/7.X.X_Ü3_How to identify the USB port number @ 3\mod_1296549141672_912.doc @ 29849 @ 33<br />
11.3.1 Ethernet connection<br />
1. Check the<br />
installed<br />
printer driver<br />
2. Add a<br />
TCP/IP port to<br />
the printer<br />
driver<br />
3. Setup the<br />
Ethernet<br />
connection<br />
• Make sure that the already installed printer driver is the correct<br />
one for your new printer. For example the printer model AS-710<br />
requires the printer driver for the AS-710.<br />
• Add a “Standard TCP/IP Port” to the already installed printer driver<br />
as described in chapter 7.4.1, on page 84.<br />
• Setup the Ethernet connection between the printer and the PC as<br />
described in 7.4, on page 83.<br />
11.3.2 How to identify the USB port used by the printer<br />
In certain cases (e.g. further use of already installed printer drivers) it is necessary to<br />
identify the exact USB port number, when the printer is connected to the PC via USB.<br />
As most PC’s nowadays have more than one physical USB port. The USB port number can<br />
be used to identify the actual port where a device is plugged in.<br />
Depending on which PC USB port the printer is plugged in, the USB port number can be for<br />
example USB001, USB002 or etc.<br />
1. Set the<br />
printer to USB<br />
communication<br />
2. Connecting<br />
the printer<br />
3. Device<br />
detection<br />
• Check if the printer is set to USB communication in the printer<br />
menu: PRINTER CONFIG. > BOOT DEFAULTS > COMMUNICATION<br />
• If not, set it to USB.<br />
• Connect the printer to the PC with the USB cable.<br />
• Turn on the printer.<br />
• Wait until Windows detects the printer.<br />
4. Open the<br />
Device<br />
Manager<br />
5. Identify the<br />
printer device<br />
• Open the Widows Device Manager.<br />
Start > Control Panel > Hardware and Sound > Device Manager<br />
• The printer device will be shown under<br />
Universal Serial Bus controllers > USB Printing Support.<br />
See Figure 60.<br />
<strong>User</strong> Manual Version 3.1 135
Change language