PDF catalogue - item Industrietechnik GmbH
PDF catalogue - item Industrietechnik GmbH
PDF catalogue - item Industrietechnik GmbH
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Systematic innovation.<br />
New Products 2012/ II – Work Bench System and MB Building Kit System
Experience innovation – the new <strong>item</strong> products for 2012/ II.<br />
04 Work Bench System<br />
The Work Bench System from <strong>item</strong> can now make your production operations even more productive.<br />
Our latest products bring tools closer to hand and enable users to position working materials where it<br />
suits them best. The new compact SystemMobile S can also be manoeuvred with exceptional ease in<br />
the tightest of spaces.<br />
The combination of spiral hose, Tool Balancer and the new Compound Slide Overhang makes it<br />
even easier to lay your hands on suspended tools. An electric or compressed-air screwdriver can<br />
be grabbed, used and then removed from the working area again with virtually no effort. All cables<br />
and hoses are carefully stowed with no risk of entanglement. Customised, high-strength Pivot Arms<br />
and special solutions for monitors and keyboards keep tools within easy reach. And when they’re no<br />
longer needed they take up very little space.<br />
That’s why these new products fit perfectly with the <strong>item</strong> Work Bench System. The working height of<br />
all our benches can be varied, if required via an electrical height-adjustment system. Because these<br />
systems can adapt to the needs of different employees and tasks, they offer ergonomic and costeffective<br />
solutions with an exceptional service life.<br />
2
26 MB Building Kit System<br />
The MB Building Kit System is taking it up a gear. Automatic Angle Bracket Sets and Automatic Flat<br />
Bracket Sets offer the fastest ever means of connecting two profiles. Insert, tighten, and that’s it!<br />
The fasteners are fully preassembled. All the screws automatically slot into the correct position in a<br />
Line 8 groove and simply need to be tightened, as there is no need for separate T-Slot Nuts or threads.<br />
The entire system requires no profile machining and can be reused and repositioned at any time. It<br />
doesn’t get any faster, or any more convenient.<br />
The new Protective Profiles made from impact-absorbing PE foam are another very practical solution.<br />
This flexible impact protection covers over profile edges and sides, preventing both damage and injuries.<br />
The new Friction Joints help boost the ergonomic credentials of factory equipment. They represent<br />
the building blocks for customised swivelling structures. The new joints are designed to carry heavy<br />
loads. Their dual screw connections mean structures can have twice the support width and carry heavy<br />
weights with ease.<br />
3
Flyover.<br />
<br />
Compound Slide Overhang<br />
Everything good comes from on high. The Compound Slide Overhang makes work easier<br />
with a smooth-running hanger that allows operators to position tools and feed lines<br />
anywhere over the table top and then park them close by when not in use.<br />
The Compound Slide Overhang is mounted on an Upright fitted to an <strong>item</strong> work bench E<br />
or F. As a result, the height of the Overhang from the working surface can be adjusted to<br />
suit requirements. The groove running along the top of the Compound Slide Overhang can<br />
be used for installing accessories such as <strong>item</strong> Light Fitting 36W for lighting up the work<br />
area.<br />
4
182<br />
≤ 845<br />
s<br />
≤ 1270<br />
This improves ergonomics at the work bench and prevents constrained posture<br />
during repetitive activities.<br />
Tool Balancers and Spiral Hoses available from <strong>item</strong> offer versatile options for<br />
securing tools to the Compound Slide.<br />
You can now plan your work<br />
bench online, too:<br />
workbench.<strong>item</strong>24.com<br />
The following applies to all the products below:<br />
Runway Profile 8 40x40<br />
Profile 8 40x40 light<br />
Diagonal strut 8 300x30, St, powder-coated white aluminium<br />
Runway Slide Set 8 40x40<br />
Tool slide 8 40x40<br />
Fastening elements<br />
1200/1500/1800<br />
680<br />
Compound Slide Overhang 1200<br />
m = 9.7 kg<br />
1 set 0.0.652.38<br />
Compound Slide Overhang 1500<br />
m = 10.6 kg<br />
1 set 0.0.652.37<br />
<br />
<br />
46<br />
Compound Slide Overhang 1800<br />
m = 11.4 kg<br />
1 set 0.0.652.36<br />
<br />
5
Top secret.<br />
Mini-Locker 360x240x240<br />
Safe and sound. The Mini-Locker keeps belongings away from prying eyes, with a combination lock to protect against<br />
theft. Privately owned tools, valuables, etc. can all be stowed discretely at the work bench. This roomy locker can be<br />
installed in various positions on a work bench.<br />
TIP<br />
The Mini-Locker features pre-punched mounting points that<br />
cannot be seen from outside. To fasten it to profiles or panel<br />
elements, simply pierce these points to create holes in the<br />
desired positions.<br />
⌀8.6<br />
200<br />
Mini-Locker 360x240x240<br />
Steel sheet, powder-coated white aluminium<br />
Combination lock<br />
Fastening elements<br />
Notes on Use and Installation<br />
m = 4.5 kg<br />
1 set 0.0.652.90<br />
360<br />
280<br />
240<br />
240<br />
6
Lightning conductor.<br />
<br />
ESD Spiral Connection Cable - Ring Connector 5 mm<br />
Dynamic working environments need to be able to dissipate electrostatic charges, too.<br />
Because it doesn’t create cumbersome loops when lengthened and shortened, this spiral<br />
cable is ideal for use on movable parts. Versatile ring connectors enable quick connections,<br />
ensuring that ESD-sensitive environments enjoy uninterrupted protection.<br />
200 - 700<br />
⌀5.1<br />
ESD Spiral Connection Cable - Ring Connector 5 mm<br />
ESD Spiral Connection Cable with two 5 mm ring connectors<br />
m = 40.0 g<br />
1 pce. 0.0.650.54<br />
<br />
7
Back and forth.<br />
Pivot Arm and holder in one<br />
<br />
Monitor Arm<br />
Keyboard Arm<br />
For intelligent work benches. Pivot Arms ensure that monitor and keyboard are perfectly<br />
positioned when they’re being used and don’t take up valuable space when they’re not.<br />
The Monitor Arm features a standardised holder that is compatible with virtually any<br />
monitor with VESA 75 or VESA 100 connection dimensions. The variety of pivot axes<br />
ensures that the display can always be manoeuvred into the ideal viewing angle. Precisely<br />
adjustable resistance makes it easy to move the monitor closer or further away and adjust<br />
the horizontal and vertical angle.<br />
The keyboard arm combines a robust Pivot Arm with the innovative <strong>item</strong> Keyboard Shelf,<br />
which features a fold-out mouse rest that can be fitted to either the left or right of the<br />
keyboard.<br />
8
Ø4.3<br />
□75<br />
□100<br />
□113<br />
18<br />
352<br />
□40<br />
114.5<br />
Monitor Arm<br />
Friction Joint 8, Standard Swivel Joint<br />
Profile 8 40x40 3N light, Al, anodized<br />
Monitor joint 8 VESA 75-100, pivotable and rotatable<br />
3 Universal Holders<br />
3 cable ties<br />
Notes on Use and Installation<br />
m = 1.3 kg<br />
<br />
1 set 0.0.649.44<br />
370<br />
Keyboard Arm<br />
<br />
70<br />
525<br />
300<br />
□40<br />
Pivot Arm 8 370 light<br />
Profile 8 40x40 E, Al, anodized<br />
Keyboard Shelf 500x200, Al, powder-coated white aluminium<br />
2 Caps 8 40x40, PA, grey<br />
4 T-Slot Nuts 8 St M8, bright zinc-plated<br />
4 Button-Head Screws M8x14, St, bright zinc-plated<br />
3 Universal Holders<br />
3 cable ties<br />
m = 4.0 kg<br />
1 set 0.0.649.43<br />
9
The hands-on solution.<br />
3 variants for various tools<br />
<br />
Tool Holder D70<br />
Handy and ingenious – the Tool Holders made of polyurethane structural foam make it easy to organise<br />
your workspace.<br />
Three different variants are available for a variety of purposes.<br />
The classic Container shape is ideal for pens and small objects.<br />
The inside of Tool Holder D70 Screwdriver is shaped like a funnel, making it easy for users to insert and<br />
remove screwdrivers and keys without a second thought.<br />
Tool Holder D70 Pliers has two integrated angle-adjustable surfaces that keep your pliers at the perfect<br />
angle. As a result, the tool automatically slides into the ideal position for removal, even if it is not put<br />
back in the holder carefully.<br />
By ensuring tools can be removed and replaced with the greatest of ease, these holders cut assembly<br />
times and take the strain off personnel by eliminating unnecessary exertion in the arms and joints. The<br />
robust but flexible material also cuts noise levels.<br />
10
Ø60<br />
Ø62.5 Ø65<br />
92<br />
Ø22<br />
Ø13<br />
0.0.648.31 / 0.0.653.29<br />
0.0.648.30 / 0.0.653.28 0.0.648.29 / 0.0.653.27<br />
The internal shapes of the various Holders D70 have been optimised to accommodate different tools.<br />
5<br />
⌀79<br />
Tool Holder D70 Container<br />
Tool Holder D70 Container, PUR, black<br />
m = 79.0 g<br />
1 pce. 0.0.648.31<br />
⌀70<br />
100<br />
Tool Holder D70 Container ESD<br />
Tool Holder D70 Container, PUR, black<br />
m = 79.0 g<br />
1 pce. 0.0.653.29<br />
<br />
5<br />
⌀79<br />
Tool Holder D70 Pliers<br />
Tool Holder D70 Pliers, PUR, black<br />
m = 120.0 g<br />
1 pce. 0.0.648.30<br />
⌀70<br />
100<br />
Tool Holder D70 Pliers ESD<br />
Tool Holder D70 Pliers, PUR, black<br />
m = 120.0 g<br />
1 pce. 0.0.653.28<br />
<br />
5<br />
⌀79<br />
Tool Holder D70 Screwdriver<br />
Tool Holder D70 Screwdriver, PUR, black<br />
m = 125.0 g<br />
1 pce. 0.0.648.29<br />
⌀70<br />
100<br />
Tool Holder D70 Screwdriver ESD<br />
Tool Holder D70 Screwdriver, PUR, black<br />
m = 125.0 g<br />
1 pce. 0.0.653.27<br />
<br />
11
Take three!<br />
<br />
Holder Support D70<br />
Holder Console D70<br />
The Holder Console keeps tools and small parts within easy reach. This stable system can hold<br />
three Holders D70 at the same time. The incremental angle adjustment offers 10 different settings<br />
to make sure the Holders are in sync with the current working position (sitting or standing) and the<br />
ergonomic needs of the user. Regardless of the setting, the Holders are always held securely.<br />
Made of stainless steel wire, Holder Support D70 is designed to accommodate a single Holder.<br />
Two variants are available – the classic vertical support and a support that positions a Holder at an<br />
ergonomic angle of 30°.<br />
12
16<br />
30°<br />
114<br />
□32<br />
65<br />
96<br />
Ø70<br />
Holder Support D70<br />
Wire, St, stainless<br />
Wire mount, PA-GF<br />
Hexagon Socket Head Cap Screw DIN 912-M6x20, St, bright zinc-plated<br />
Washer DIN 433-6.4, St, bright zinc-plated<br />
T-Slot Nut V 8 St M6, bright zinc-plated<br />
m = 65.0 g<br />
black, 1 set 0.0.648.36<br />
<br />
142<br />
Holder Support D70-30°<br />
Wire, St, stainless<br />
Wire mount, PA-GF<br />
Hexagon Socket Head Cap Screw DIN 912-M6x20, St, bright zinc-plated<br />
Washer DIN 433-6.4, St, bright zinc-plated<br />
T-Slot Nut V 8 St M6, bright zinc-plated<br />
m = 70.0 g<br />
black, 1 set 0.0.648.40<br />
<br />
⌀70<br />
22.5° - 90°<br />
100<br />
⌀70<br />
Holder Console D70<br />
Holder Console D70, St, powder-coated white aluminium<br />
m = 2.5 kg<br />
1 pce. 0.0.649.26<br />
7.5°<br />
200<br />
190<br />
13
That’s me out of the way.<br />
Flexible compressed-air conduit<br />
Keeping everything in its place<br />
The ideal accessory for Tool Balancers<br />
Spiral Hose for Tool Balancers 2x10 mm<br />
The compressed-air conduit – neat and tidy as standard. The Spiral Hose looks neat and stops you stepping on your hose<br />
at the work bench. When retracted, this space-saving compressed-air conduit measures just 170 mm in length, but can be<br />
easily pulled out to the ideal length.<br />
The Spiral Hose is perfect for use with <strong>item</strong> Tool Balancers. It is attached directly to a Tool Balancer and can easily be<br />
retrofitted to existing systems. The support cable and pneumatic hose do not get in each others way. The return height of<br />
the tool can be adjusted as required. Depending on the tool and task at hand, Tool Balancers with load-carrying capacities<br />
of up to 1 kg (0.0.631.84), up to 2 kg (0.0.636.48) and up to 3 kg (0.0.649.96) are available.<br />
When used together, a Spiral Hose, Tool Balancer and Compound Slide Overhang make working with pneumatic tools<br />
exceptionally straightforward and convenient. Quick-action couplings at the ends of the hose ensure the system can be<br />
connected up in next to no time.<br />
14
Ø100<br />
76.7<br />
Ø20<br />
Ø10<br />
Spiral Hose for Tool Balancers 2 x D10 mm<br />
Spiral hose D10, PA 12, grey<br />
2 quick-action couplings D10<br />
Fastening elements<br />
m = 216.0 g<br />
1 set 0.0.650.67<br />
170 - 1600<br />
Ø10<br />
15
72<br />
Hanging out.<br />
<br />
Container Support<br />
The Container Support is the simplest way of fitting Parts Containers to a preconfigured<br />
work bench. The Container Profile has a lip that is compatible with all standard semi-open<br />
fronted boxes with mounting lugs. The ergonomic 7° or 15° inclination of the support makes<br />
it easy to remove small parts and keep an overview of the material in the containers. The<br />
Container Support is fastened to the vertical struts of the Upright either at a fixed right-angle<br />
(F) or at a variable angle (A).<br />
Several material levels can be set up at a work bench by installing more than one Container<br />
Support.<br />
72<br />
<br />
40<br />
1<br />
16<br />
2.5<br />
You can now plan your work<br />
bench online, too:<br />
workbench.<strong>item</strong>24.com<br />
Container Support E 1200 F<br />
Container Profile 8 80x40, Al, anodized<br />
4 Automatic-Fastening Sets 8<br />
2 Automatic-Fastening Set Caps, PA-GF, grey<br />
a = 1,080 mm m = 2.6 kg<br />
1 set 0.0.650.35<br />
<br />
40<br />
a<br />
Container Support E 1500 F<br />
Container Profile 8 80x40 1380 mm, Al, anodized<br />
4 Automatic-Fastening Sets 8<br />
2 Automatic-Fastening Set Caps, PA-GF, grey<br />
a = 1,380 mm m = 3.2 kg<br />
1 set 0.0.650.40<br />
<br />
16
72<br />
Container Support E 1800 F<br />
Container Profile 8 80x40 1680 mm, Al, anodized<br />
4 Automatic-Fastening Sets 8<br />
2 Automatic-Fastening Set Caps, PA-GF, grey<br />
a = 1,680 mm m = 4.0 kg<br />
1 set 0.0.650.36<br />
Container Support F 1200 F<br />
Container Profile 8 80x40 1110 mm, Al, anodized<br />
4 Automatic-Fastening Sets 8<br />
2 Automatic-Fastening Set Caps, PA-GF, grey<br />
a = 1,110 mm m = 2.7 kg<br />
1 set 0.0.650.29<br />
Container Support F 1500 F<br />
Container Profile 8 80x40 1410 mm, Al, anodized<br />
4 Automatic-Fastening Sets 8<br />
2 Automatic-Fastening Set Caps, PA-GF, grey<br />
a = 1,410 mm m = 3.3 kg<br />
1 set 0.0.650.30<br />
Container Support F 1800 F<br />
Container Profile 8 80x40 1710 mm, Al, anodized<br />
4 Automatic-Fastening Sets 8<br />
2 Automatic-Fastening Set Caps, PA-GF, grey<br />
a = 1,710 mm m = 4.0 kg<br />
1 set 0.0.650.31<br />
<br />
<br />
<br />
<br />
a-10<br />
Container Support E 1200 W<br />
Container Profile 8 80x40 1070 mm, Al, anodized<br />
Fastening Set for Container Profile 8 80x40<br />
a = 1,070 mm m = 2.7 kg<br />
1 set 0.0.650.37<br />
<br />
40<br />
80<br />
a<br />
Container Support E 1500 W<br />
Container Profile 8 80x40 1370 mm, Al, anodized<br />
Fastening Set for Container Profile 8 80x40<br />
a = 1,370 mm m = 3.4 kg<br />
1 set 0.0.650.38<br />
Container Support E 1800 W<br />
Container Profile 8 80x40 1670 mm, Al, anodized<br />
Fastening Set for Container Profile 8 80x40<br />
a = 1,670 mm m = 4.0 kg<br />
1 set 0.0.650.39<br />
Container Support F 1200 W<br />
Container Profile 8 80x40 1100 mm, Al, anodized<br />
Fastening Set for Container Profile 8 80x40<br />
a = 1,110 mm m = 2.8 kg<br />
1 set 0.0.650.32<br />
Container Support F 1500 W<br />
Container Profile 8 80x40 1400 mm, Al, anodized<br />
Fastening Set for Container Profile 8 80x40<br />
a = 1,400 mm m = 3.5 kg<br />
1 set 0.0.650.33<br />
Container Support F 1800 W<br />
Container Profile 8 80x40 1700 mm, Al, anodized<br />
Fastening Set for Container Profile 8 80x40<br />
a = 1,700 mm m = 4.2 kg<br />
1 set 0.0.650.34<br />
<br />
<br />
<br />
<br />
<br />
17
Might it be a little heavy<br />
High-strength Double Pivot Arm<br />
<br />
Double Pivot Arm 8 80 695 heavy-duty<br />
When a long reach and high carrying capacity are called for, Double Pivot Arm 8 80 695<br />
heavy-duty is the solution. Its reinforced joints can accommodate vertical loads of up to<br />
250 N. They can be folded into virtually any position and then locked in place. As a result,<br />
tools and materials can always be kept in easy reach.<br />
Note:<br />
The Friction Joints of the Pivot Arms are also available separately in the MB Building Kit System<br />
for use in customised solutions.<br />
185<br />
80<br />
370<br />
325<br />
Double Pivot Arm 8 80 695 heavy-duty<br />
Profile 8 80x40 4N 180 E<br />
2 Profiles 8 40x40 3N light<br />
End Swivel Joint 80<br />
2 Double Swivel Joints 80<br />
Mounting cover, PA, grey<br />
3 mounting plates, Al, natural<br />
3 Button-Head Screws M8x22, St, bright zinc-plated<br />
3 T-Slot Nuts 8 St M8, bright zinc-plated<br />
Notes on Use and Installation<br />
m = 4.2 kg<br />
1 set 0.0.651.33<br />
<br />
18
Strong arm.<br />
<br />
Pivot Arm 8 80 370 heavy-duty<br />
What might be a tough challenge for others is no problem for this solution –<br />
Pivot Arm 8 80 370 heavy-duty can be used to safely reposition loads of up to<br />
400 N over the table top of a work bench. The strongest Pivot Arm available<br />
from <strong>item</strong> can be positioned and moved with exceptional precision. Its adjustable<br />
frictional moment is consistent regardless of the direction of rotation. The<br />
grooves of the profile offer a whole range of fastening options for attachments<br />
and cable holders.<br />
360°<br />
The connection can be made with either a horizontal or vertical profile groove.<br />
An end-face connection with Profiles is also possible.<br />
All the joints can be rotated through 360° and their frictional moment can be<br />
adjusted.<br />
185<br />
□40<br />
370<br />
Pivot Arm 8 80 370 heavy-duty<br />
Profile 8 80x40 4N 180 E<br />
End Swivel Joint 80<br />
Double Swivel Joint 80<br />
Mounting cover, PA, grey<br />
3 mounting plates, Al, natural<br />
3 Button-Head Screws M8x22, St, bright zinc-plated<br />
3 T-Slot Nuts 8 St M8, bright zinc-plated<br />
Notes on Use and Installation<br />
m = 2.2 kg<br />
1 set 0.0.651.25<br />
<br />
19
Reaching new heights.<br />
Marius<br />
⇨ Foto<br />
Foto NEU<br />
mit Bewegung<br />
<br />
Pivot Arm Height Adjusters 8<br />
Welcome to the third dimension. These Height Adjusters make the Pivot Arms from <strong>item</strong><br />
even more versatile. Working height can be adjusted with ease, which is extremely useful<br />
when changing working positions or processing workpieces and products of various sizes.<br />
The work bench can also be adapted to suit the size and reach of different personnel.<br />
20
Height Adjusters are available to suit all the various connection dimensions of<br />
the Pivot Arms.<br />
Pivot Arm Height Adjuster 8 150<br />
Pivot Arm 8 370 light 0.0.631.17<br />
Keyboard Arm 0.0.649.43<br />
Monitor Arm 0.0.649.44<br />
Pivot Arm Height Adjuster 8 240<br />
Double Pivot Arm 8 695 0.0.631.19<br />
Pivot Arm 8 80-370 heavy-duty 0.0.651.25<br />
Double Pivot Arm 8 80-695 heavy-duty 0.0.651.33<br />
Pivot Arm Height Adjuster 8 290<br />
Double Pivot Arm 8 695 heavy-duty 0.0.631.20<br />
The following applies to all the products below:<br />
Profile 8 40x16<br />
2 Button-Head Screws M8x16, St, bright zinc-plated<br />
2 Caps 8 40x16, PA-GF, grey<br />
2 Washers DIN 433 8.4, St, bright zinc-plated<br />
2 T-Slot Nuts V 8 St M8, bright zinc-plated<br />
16<br />
40<br />
Pivot Arm Height Adjuster 8 150<br />
m = 215.0 g<br />
1 set 0.0.631.51<br />
<br />
150 / 240 / 290<br />
Pivot Arm Height Adjuster 8 240<br />
m = 293.0 g<br />
1 set 0.0.651.55<br />
Pivot Arm Height Adjuster 8 290<br />
m = 388.0 g<br />
1 set 0.0.651.54<br />
<br />
<br />
21
On a roll.<br />
<br />
Roller Insert 4xD11<br />
These rollers are tough. Roller Insert 4xD11 makes light work of moving even<br />
heavy loads. Each module comprises four solid rollers that distribute load more<br />
efficiently than a single castor. Their size means they can be used alongside all the<br />
other inserts designed for Castor Rail 8 40x40.<br />
22
F<br />
49.5<br />
The rollers can even cope well with crates that have awkward or irregular<br />
bases, since low rolling resistance keeps everything running smoothly and<br />
provides a high load-carrying capacity.<br />
Customising Castor Rail 8 40x40 couldn’t be easier:<br />
Simply push the inserts into the rail to build your ideal roller<br />
conveyor.<br />
Caps secure the ends.<br />
Permissible load per Roller Insert: F max. = 250 N.<br />
The following applies to all the products below:<br />
4 rollers D11, PA<br />
Housing, PA-GF, black<br />
4 axles, St, stainless<br />
Ø11<br />
22<br />
Roller Insert 4xD11<br />
m = 31.0 g<br />
10<br />
9.5<br />
black, similar to RAL 9005, 1 set 0.0.644.55<br />
33.3<br />
50<br />
Roller Insert 4xD11 ESD<br />
m = 30.0 g<br />
<br />
black, similar to RAL 9005, 1 set 0.0.648.98<br />
23
Compact class.<br />
<br />
<br />
Lightweight and manoeuvrable<br />
<br />
<br />
SystemMobiles S<br />
SystemMobiles S are exceptionally compact. These manoeuvrable picking and provisioning trolleys get tools<br />
and small quantities of materials to where they are needed – fast. The single central column is also available<br />
in a height-adjustable version. The all-round edging on the tray makes sure everything stays put so that both<br />
standard storage boxes and individual <strong>item</strong>s can be moved around as necessary.<br />
The lightweight SystemMobiles S get spare parts and working materials directly to the place of work. Their fully<br />
adjustable tilt angle puts everything in easy reach. While the standard models feature a fixed working height<br />
(680 or 950 mm), the lifting column of SystemMobile S41T with its gas spring provides additional versatility.<br />
The load-carrying capacity of the tray is 300 N (the gas spring can lift a load of 200 N).<br />
Four Swivel Castors with double-brakes deliver exceptional manoeuvrability while ensuring the system stays put<br />
when required. SystemMobiles S are also available in ESD-safe variants.<br />
≤30°<br />
680 - 1025<br />
All SystemMobiles are supplied fully assembled<br />
with the desired accessories.<br />
Configure your customised solution online now.<br />
systemmobile.<strong>item</strong>24.com<br />
24
SystemMobile Usable depth (approx.) Usable width (approx.) Frame width Frame length Height Item No.<br />
<br />
a (mm) b (mm) c (mm) d (mm) h (mm) frame *<br />
S41M S41M-ESD 400 600 482 671 680 0.0.652.68<br />
S41H S41H-ESD 400 600 482 671 950 0.0.652.69<br />
S41T S41T-ESD 400 600 482 671 680-1,025 0.0.651.68<br />
* The appropriate swivel castors are added automatically during the product configuration process!<br />
610<br />
410<br />
SystemMobile S41M<br />
SystemMobile frame without Swivel Castors<br />
<br />
1 set 0.0.652.68<br />
SystemMobile S41H<br />
SystemMobile frame without Swivel Castors<br />
<br />
1 set 0.0.652.69<br />
680/950<br />
671<br />
482<br />
610<br />
410<br />
SystemMobile S41T<br />
SystemMobile frame without Swivel Castors<br />
Lifting column with gas spring<br />
1 set 0.0.651.68<br />
<br />
<br />
482<br />
680 - 1025<br />
671<br />
Castor D100 swivel with double-brake<br />
m = 780.0 g<br />
1 pce. 0.0.602.40<br />
Castor D100 swivel with double-brake antistatic<br />
m = 780.0 g<br />
1 pce. 0.0.602.41<br />
<br />
25
High speed connection.<br />
Ready for use thanks to preassembled components<br />
Automatically fits into the profile groove<br />
Installed in seconds<br />
<br />
<br />
<br />
Automatic flat and angle bracket sets<br />
The fastest profile connection ever – automatic angle brackets and automatic flat brackets from<br />
<strong>item</strong>.<br />
These innovative fasteners are fully preassembled and ready for use.<br />
Simply fit them in place and the screws slot into the correct position. Tighten the screws and<br />
that’s it, the profiles are held in place without the need for additional T-Slot Nuts.<br />
Automatic Flat Bracket Sets and Automatic Angle Bracket Sets virtually install themselves.<br />
No threads need to be tapped and profiles don’t need to be machined. The fasteners can be<br />
inserted at any point along a Line 8 groove and can be reused and repositioned whenever<br />
required. All you need to do is turn the screws.<br />
Automatic Angle Bracket Sets make connections inside the frame contour and Automatic Flat<br />
Bracket Sets produce readily accessible connections on the outside of the frame. Unlike other<br />
profile fasteners, automatic flat brackets are installed on the profiles and can therefore be used<br />
to reinforce connections, since the large support width is extremely effective at compensating<br />
for torque loads.<br />
Profile connections made with automatic flat and angle bracket sets can also compensate for<br />
inaccuracies and errors made when cutting profiles to length.<br />
Automatic flat bracket and angle bracket sets are ideal whenever work needs to move fast.<br />
They are an ingenious innovation from <strong>item</strong> that further simplifies assembly work.<br />
26
80<br />
40<br />
Simply slot the angle and flat brackets with<br />
preassembled automatic T-slot screws into a<br />
Line 8 groove.<br />
Tighten the nut and that’s it – the fastest<br />
profile connection ever.<br />
Recommended tightening torque: 20 Nm<br />
When using Automatic Flat Bracket Sets,<br />
caps cover the nuts, which are located on the<br />
outside of the construction.<br />
40<br />
20<br />
8<br />
20<br />
40<br />
Automatic Angle Bracket Set 8 40x40 Al<br />
Automatic angle bracket 8 40x40, die-cast Al, white aluminium similar to RAL 9006<br />
2 automatic T-slot screws M8x11, St, bright zinc-plated<br />
2 countersunk nuts M8x6, St, bright zinc-plated<br />
m = 87.0 g<br />
1 set 0.0.642.54<br />
<br />
40<br />
20<br />
Automatic Angle Bracket Set 8 80x80 Al<br />
<br />
20<br />
80<br />
40<br />
Automatic angle bracket 8 80x80, die-cast Al, white aluminium similar to RAL 9006<br />
4 automatic T-slot screws M8x11, St, bright zinc-plated<br />
4 countersunk nuts M8x6, St, bright zinc-plated<br />
m = 208.0 g<br />
8<br />
1 set 0.0.642.56<br />
27
40<br />
Automatic Flat Bracket Set 8 80x40 Al<br />
<br />
7<br />
8<br />
20<br />
40<br />
80<br />
20<br />
Automatic flat bracket 8 80x40, die-cast Al, white aluminium similar to RAL 9006<br />
2 automatic T-slot screws M8x11, St, bright zinc-plated<br />
2 countersunk nuts M8x6, St, bright zinc-plated<br />
2 Caps 8 D20, PA-GF, grey similar to RAL 7042<br />
m = 88.0 g<br />
1 set 0.0.642.53<br />
7<br />
120<br />
120<br />
40 40<br />
20<br />
Automatic Flat Bracket Set 8 120x120 Al<br />
Automatic flat bracket 8 120x120, die-cast Al, white aluminium similar to RAL 9006<br />
4 automatic T-slot screws M8x11, St, bright zinc-plated<br />
4 countersunk nuts M8x6, St, bright zinc-plated<br />
4 Caps 8 D20, PA-GF, grey similar to RAL 7042<br />
m = 257.0 g<br />
<br />
1 set 0.0.642.55<br />
20<br />
40<br />
⌀22<br />
⌀20<br />
4.5<br />
Cap 8 D20<br />
PA-GF<br />
m = 1.0 g<br />
grey similar to RAL 7042, 1 pce. 0.0.651.65<br />
<br />
28
Firm hold.<br />
<br />
Flat and angle brackets 10 50<br />
The simple and stable attachment fasteners are now also available for Line 10. Sturdy steel<br />
angle brackets and flat brackets with countersinks can be screwed to the grooves or core bores<br />
of Line 10 profiles. M10 screws ensure a firm hold for panel elements and shelves on a profile<br />
construction.<br />
The compatible fastening set is designed for creating a screw attachment with a profile groove.<br />
6<br />
50<br />
50<br />
100<br />
Flat Bracket 10 50<br />
St<br />
m = 204.0 g<br />
white aluminium, similar to RAL 9006, 1 pce. 0.0.632.45<br />
<br />
50<br />
6<br />
25<br />
Angle Bracket 10 50<br />
St<br />
m = 185.0 g<br />
white aluminium, similar to RAL 9006, 1 pce. 0.0.632.46<br />
<br />
50<br />
50<br />
Fastening Set 10 for Angle Bracket 10 50 / Flat Bracket 10 50<br />
Countersunk Screw DIN 7991-M10x18, St, bright zinc-plated<br />
T-Slot Nut 10 St M10, bright zinc-plated<br />
m = 21.0 g<br />
1 set 0.0.632.47<br />
<br />
29
Bodyguard.<br />
<br />
Protective Profiles 8 40x20 E<br />
Maximum safety for minimum effort. The Protective Profiles<br />
made from impact-absorbing PE foam can be fitted in next to no<br />
time and give profile edges and sides robust protection against<br />
impacts. They are also ideal for use as transport packing.<br />
40<br />
Protective Profile 8 40x20 E<br />
<br />
20<br />
PE, foamed<br />
m = 22 g/m<br />
8<br />
grey, 1 pce., length 2000 mm 0.0.645.03<br />
20<br />
60<br />
20<br />
R16<br />
Protective Profile 8 40x20-90° E<br />
PE, foamed<br />
m = 57 g/m<br />
grey, 1 pce., length 2000 mm 0.0.649.32<br />
<br />
8<br />
30
Heavyweight holders.<br />
<br />
Friction Joints 8<br />
Looking for that little something extra Friction Joints 8 80 are the answer, as they can be assembled and<br />
configured to build strong, custom-made swivelling structures.<br />
The joints can be used to span double the support width or carry double the load of Friction Joint 40. The dual<br />
screw connection provides additional strength.<br />
The brake in the Friction Joint allows precise adjustment, ensuring pivot arms can be easily positioned without<br />
being difficult to move.<br />
The preassembled sets are supplied with screws and are ready to connect. Screws can be connected to the end<br />
face of a Profile 8 80 via the core bore or to a groove. Press-fit anti-torsion features grip into the profile grooves<br />
to ensure play-free connections.<br />
31
The connection can be made with either a horizontal or vertical<br />
profile groove. An end-face connection with Profiles is also<br />
possible.<br />
All the joints can be rotated through 360° and their frictional<br />
moment can be adjusted.<br />
360°<br />
M<br />
The maximum torque load for an End Swivel Joint 80 is 45 Nm,<br />
while Double Swivel Joint 80 can withstand moments of up to<br />
200 Nm.<br />
185<br />
80<br />
40<br />
43.5<br />
□40<br />
Friction Joint 8, Double Swivel Joint 80<br />
3 Friction Joints<br />
4 mounting plates, Al, natural<br />
4 Button-Head Screws M8x22, St, bright zinc-plated<br />
Notes on Use and Installation<br />
m = 1005.0 g<br />
1 pce. 0.0.651.16<br />
<br />
80<br />
40<br />
43.5<br />
Friction Joint 8, End Swivel Joint 80<br />
Friction Joint<br />
3 mounting plates, Al, natural<br />
3 Button-Head Screws M8x22, St, bright zinc-plated<br />
Connection seal, PA, grey<br />
Notes on Use and Installation<br />
m = 471.0 g<br />
1 pce. 0.0.651.24<br />
<br />
32
Adjustment required.<br />
<br />
Table Column Sets 2 E and 4 E<br />
The <strong>item</strong> Table Column Sets are the basis for customised, electrically heightadjustable<br />
work benches.<br />
The stable lifting columns support a range of working positions with a maximum<br />
travel distance of 420 mm. The ability to swap easily between sitting and<br />
standing work takes a great deal of strain off the back.<br />
Three different working heights can be saved to introduce ergonomics into<br />
everyday working life – whether different operators are using the same bench<br />
during different shifts, or users want to quickly change between typical working<br />
positions. The columns feature a lifting force of 2,000 N (Table Column Set 2<br />
E) or 4,000 N (Table Column Set 4 E). They also exhibit a satisfying travelling<br />
speed of 25 mm/s across the entire load range.<br />
Fitted as standard for increased safety, a lock can be activated to prevent<br />
unintentional movement.<br />
The base plates are pre-tapped with M10 threaded bores designed to accommodate<br />
Adjustable Feet. The Line 8 grooves on the outer Telescope Profile can<br />
be used to attach load-bearing and connecting structures.<br />
Note: On-time must not exceed 10%. The columns are designed exclusively for<br />
the occasional adjustment of tables and fixtures and are not intended for use in<br />
automation processes.<br />
33
Profile 8 160x60 4N E can be used to build<br />
customised work bench solutions with the<br />
Table Column Sets.<br />
M<br />
45<br />
M6<br />
The M6 threaded bores in the mounting plates<br />
can be used in combination with Automatic-<br />
Fastening Sets 8 to connect the columns to<br />
Profiles 8 160x60 4N E.<br />
Work bench designs must take into account<br />
the maximum permissible torque load for the<br />
table columns of M max. = 140 Nm.<br />
M10<br />
M8<br />
100<br />
160<br />
160<br />
146.6<br />
60<br />
The M10 threaded bores in<br />
the base plates can be used<br />
to connect any Adjustable<br />
Feet.<br />
Note<br />
IEC connector on control unit => all region-specific<br />
power lines can be used.<br />
Table Column Set 2 E 230V<br />
⌀4<br />
227<br />
119<br />
60<br />
2 columns, Al, anodized, natural, with 2 m feed line<br />
Control unit with 5 m mains cable,<br />
Table switch panel, 3 positions storable, digital height gauge with 2 m feed line<br />
Rated voltage: 230V~ 50/60 Hz<br />
Total lifting force 2000 N<br />
Travelling speed: 25 mm/s<br />
On-time 10%<br />
Temperature range -5°C to 40°C<br />
Protection IP 30<br />
Conformity: CE<br />
Notes on Use and Installation<br />
m = 18.7 kg<br />
41<br />
⌀3.5<br />
1 set 0.0.650.02<br />
Table Column Set 2 E 120V<br />
165<br />
680 - 1100<br />
2 columns, Al, anodized, natural, with 2 m feed line<br />
Control unit with IEC 60320-C18 connector<br />
Table switch panel, 3 positions storable, digital height gauge with 2 m feed line<br />
Rated voltage: 120V~ 50/60 Hz<br />
Total lifting force 2000 N<br />
Travelling speed: 25 mm/s<br />
On-time 10%<br />
Temperature range -5°C to 40°C<br />
Protection IP 30<br />
Notes on Use and Installation<br />
m = 17.6 kg<br />
60<br />
160<br />
1 set 0.0.650.03<br />
34
⌀4<br />
Table Column Set 4 E 230V<br />
41<br />
165<br />
⌀3.5<br />
227<br />
680 - 1100 60<br />
119<br />
4 columns, Al, anodized, natural, with 2 m feed line<br />
Control unit with 5 m mains cable,<br />
Table switch panel, 3 positions storable, digital height gauge with 2 m feed line<br />
Rated voltage: 230V~ 50/60 Hz<br />
Total lifting force 4000 N<br />
Travelling speed: 25 mm/s<br />
On-time 10%<br />
Temperature range -5°C to 40°C<br />
Protection IP 30<br />
Conformity: CE<br />
Notes on Use and Installation<br />
m = 35.5 kg<br />
1 set 0.0.650.04<br />
Table Column Set 4 E 120V<br />
4 columns, Al, anodized, natural, with 2 m feed line<br />
Control unit with IEC 60320-C18 connector<br />
Table switch panel, 3 positions storable, digital height gauge with 2 m feed line<br />
Rated voltage: 120V~ 50/60 Hz<br />
Total lifting force 4000 N<br />
Travelling speed: 25 mm/s<br />
On-time 10%<br />
Temperature range -5°C to 40°C<br />
Protection IP 30<br />
Notes on Use and Installation<br />
m = 36.5 kg<br />
1 set 0.0.650.05<br />
160<br />
60<br />
Profile 8 160x60 4N E<br />
Al, anodized<br />
A [cm 2 ] m [kg/m] I x [cm 4 ] I y [cm 4 ] W x [cm 3 ] W y [cm 3 ]<br />
19.98 5.54 102.60 703.60 34.20 87.95<br />
natural, cut-off max. 6000 mm 0.0.644.15<br />
natural, 1 pce., length 6000 mm 0.0.644.16<br />
<br />
160<br />
1.5<br />
Cap 8 160x60<br />
Metal plate, St, white aluminium similar to RAL 9006<br />
4 Caps 5 D4.3, PA, grey similar to RAL 7042<br />
m = 113.0 g<br />
1 set 0.0.653.80<br />
<br />
60<br />
35
Alphabetical Register<br />
A<br />
Angle Bracket 10 50 29<br />
Automatic Angle Bracket Sets 8 26<br />
Automatic Flat Bracket Sets 8 26<br />
C<br />
Cap 8 160x60 35<br />
Cap 8 D20 28<br />
Compound Slide Overhang 4<br />
Container Support for work benches E and F 16<br />
D<br />
Double Pivot Arm 8 80 695 heavy-duty 18<br />
E<br />
ESD Spiral Connection Cable – Ring Connector 5 mm 7<br />
F<br />
Fastening Set 10 for Angle Bracket 10 50 / Flat<br />
29<br />
Bracket 10 50 flat<br />
Flat Bracket 10 50 29<br />
Friction Joint 8, Double Swivel Joint 80 31<br />
Friction Joint 8, End Swivel Joint 80 31<br />
H<br />
Holder Console D70 12<br />
Holder Support D70 12<br />
K<br />
Keyboard Arm 8<br />
M<br />
Mini-Locker 360x240x240 6<br />
Monitor Arm 8<br />
P<br />
Pivot Arm 8 80 370 heavy-duty 19<br />
Pivot Arm Height Adjusters 8 20<br />
Profile 8 160x60 4N E 35<br />
Protective Profiles 8 40x20 E 30<br />
R<br />
Roller Insert 4xD11 22<br />
S<br />
Spiral Hose for Tool Balancers 2x10 mm 14<br />
SystemMobiles S 24<br />
T<br />
Table Column Set 2 E 33<br />
Table Column Set 4 E 33<br />
Tool Holder D70 10<br />
36
Concept, design and realization<br />
<strong>item</strong> <strong>Industrietechnik</strong> <strong>GmbH</strong>,<br />
Technical Documentation Department<br />
Photographs<br />
<strong>item</strong> <strong>Industrietechnik</strong> <strong>GmbH</strong><br />
Technical modifications and errors reserved.<br />
All rights reserved. Use of texts and illustrations or reprints of any kind<br />
only permitted with our prior written consent. This applies in particular<br />
to reproduction, translation or use in electronic systems.<br />
is a registered trademark of <strong>item</strong> <strong>Industrietechnik</strong> <strong>GmbH</strong>.<br />
© <strong>item</strong> <strong>Industrietechnik</strong> <strong>GmbH</strong> 2012<br />
Patents<br />
Any copying of protected products is a violation of these rights and,<br />
as such, shall be liable to compensation. Data and illustrations in this<br />
<strong>catalogue</strong> do not discharge the user from the obligation to carry out<br />
his own checks to determine whether the industrial property rights of<br />
third parties are infringed.<br />
Product liability<br />
<strong>item</strong> shall be liable, within the framework of the applicable legal<br />
provisions, for the promised characteristics of the products shown<br />
in this <strong>catalogue</strong>. Any claims for liability above and beyond such – in<br />
particular relating to products created by third parties using products<br />
included in this <strong>catalogue</strong> – are expressly excluded.<br />
Conditions of use<br />
The products in the <strong>item</strong> MB Building Kit System are suitable for use<br />
in dry conditions and over the temperature range -20°C to +70°C,<br />
unless otherwise stated. <strong>item</strong> must be consulted where products are<br />
to be used for applications outside these limits.<br />
Conformity with Directive 2002/95/EC (“RoHS”)<br />
<strong>item</strong> has made a voluntary undertaking to refrain from using hazardous<br />
substances as defined in Directive 2002/95/EC in the products<br />
it sells, irrespective of their subsequent purpose which, in the majority<br />
of cases, does not fall under this Directive.<br />
If you require information material, please get in<br />
touch with your distribution and service contact. Or<br />
you can visit us at our website: www.<strong>item</strong>24.com<br />
Up-to-date information is<br />
available online<br />
www.<strong>item</strong>24.com<br />
37
3<br />
2<br />
Other <strong>item</strong> product <strong>catalogue</strong>s<br />
MB8 Building Kit System<br />
Line D30<br />
MB Building Kit System 8<br />
The Comprehensive Catalogue<br />
Line D30 – the lean production system.<br />
Comprehensive Catalogue<br />
2<br />
Line XMS<br />
Work bench systems<br />
Line XMS – the integrated machine concept<br />
New Products 2012/ II<br />
The ergonomic work bench system.<br />
Comprehensive Catalogue 2.1<br />
38
© <strong>item</strong> <strong>Industrietechnik</strong> <strong>GmbH</strong> Made in Germany<br />
0.4.120.85 10/2012<br />
Your distribution and service partner<br />
Your ideas are worth it.<br />
<strong>item</strong> <strong>Industrietechnik</strong> <strong>GmbH</strong><br />
Friedenstrasse 107-109<br />
42699 Solingen<br />
Germany<br />
Phone +49 212 6580 0<br />
Fax +49 212 6580 310<br />
info@<strong>item</strong>24.com<br />
www.<strong>item</strong>24.com