You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>KX</strong>-<strong>TDA100BX</strong><br />
11.4.2. List of Errors and Solutions<br />
The tables below list the errors and their solutions.<br />
When an error whose error code is indicated with "*" occurs in the main unit (Hybrid IP-PBX), the ALARM indicator on the front<br />
of the cabinet turns on red, and the system logs the error information.<br />
When the error conditions indicated by the error codes "021", "091", "230", and "510" are recovered, the ALARM indicator will<br />
turn off automatically, indicating successful troubleshooting. When other errors are logged, the ALARM indicator will turn off<br />
only when the log for major or minor errors is cleared from the <strong>KX</strong>-TDA Maintenance Console.<br />
In other words, the ALARM indicator will turn off under the following conditions:<br />
· When the errors "021", "091", "230", and "510" are logged: when the error conditions are recovered<br />
· When other errors are logged: when the log for major or minor errors is cleared from the <strong>KX</strong>-TDA Maintenance Console<br />
MPR Card Initial Self Diagnosis<br />
Error Code Error Message PROBABLE CAUSE SOLUTION<br />
100 SRAM readwrite error · MPR card malfunction · See if the MPR card is installed properly<br />
101 Flash write error<br />
102 Flash boot check error<br />
103 SDRAM eadwrite error<br />
104 ASIC local bus register<br />
access error<br />
105 ASIC CT bus HW NG<br />
106 ASIC Local HW0 NG<br />
108 SD card not mounted · SD Memory Card not installed<br />
· Defective data in SD Memory Card<br />
· Press the Reset Button<br />
· Replace the MPR card (be sure to turn off the main unit<br />
(Hybrid IP-PBX) when replacing)<br />
· See if the SD Memory Card is installed properly<br />
· Replace the SD Memory Card<br />
· MPR card malfunction<br />
· Replace the MPR card (be sure to turn off the main unit<br />
(Hybrid IP-PBX) when replacing)<br />
109 ASIC HDLC error · MPR card malfunction · See if the MPR card is installed properly<br />
110 ASIC DMAC error<br />
· Press the Reset Button<br />
· Replace the MPR card (be sure to turn off the main unit<br />
(Hybrid IP-PBX) when replacing)<br />
LPR (Optional Service Card with Local Processor) Initial Self Diagnosis<br />
Error Code Error Message PROBABLE CAUSE SOLUTION<br />
210 ASIC local bus register<br />
access error<br />
· Optional service card malfunction:<br />
DHLC, DLC, CSIF, T1, PRI, OPB3,<br />
· See if the corresponding optional service card is installed<br />
properly<br />
211 Speech path loop-back<br />
check error<br />
CTI-LINK, E&M, IP-GW<br />
· Optional service card malfunction:<br />
DHLC, DLC, SLC, CSIF, LCOT,<br />
T1, PRI, OPB3, CTI-LINK, E&M,<br />
IP-GW<br />
212 Echo cancellor access<br />
error<br />
· Optional service card malfunction:<br />
CSIF, ECHO<br />
213 CSINF frame sync.<br />
error<br />
214 DSP Boot check error · Optional service card malfunction:<br />
T1<br />
215 Framer IC access error · Optional service card malfunction:<br />
T1, PRI<br />
216 MSG card DSP error · Optional service card malfunction:<br />
MSG, OPB3<br />
217 MSG card data error · Optional service card malfunction:<br />
MSG, OPB3<br />
218 LANC register access<br />
error<br />
· Erroneous recording of messages<br />
· Optional service card malfunction:<br />
CTI-LINK<br />
· Pull out and re-insert the corresponding optional service<br />
card<br />
· Press the Reset Button<br />
· Replace the corresponding optional service card<br />
· See if the corresponding optional service card is installed<br />
properly<br />
· Pull out and re-insert the corresponding optional service<br />
card<br />
· Press the Reset Button<br />
· Re-record the messages<br />
· Replace the corresponding optional service card<br />
· See if the corresponding optional service card is installed<br />
properly<br />
· Pull out and re-insert the corresponding optional service<br />
card<br />
· Press the Reset Button<br />
· Replace the corresponding optional service card<br />
51
Change language