SOLUTIONS Baldor AC Servo Drives for Rotary and ... - Andantex UK
SOLUTIONS Baldor AC Servo Drives for Rotary and ... - Andantex UK
SOLUTIONS Baldor AC Servo Drives for Rotary and ... - Andantex UK
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>AC</strong> <strong>Servo</strong> Drive Solutions<br />
EuroFlex<br />
Rack Mount <strong>AC</strong> <strong>Servo</strong> Drive<br />
> Brushless <strong>AC</strong> Drive - 5 Amps<br />
continuous, 15A peak<br />
> 18-56 V<strong>AC</strong> input<br />
> EuroCard 3U rack mounted module<br />
> Sinusoidal commutation with encoder<br />
feedback<br />
> RS485 port <strong>for</strong> commissioning <strong>and</strong><br />
diagnostics. RS232 optional<br />
> Ideally matched to <strong>Baldor</strong>'s NextMove ES motion<br />
controller<br />
EuroFlex is a compact rack mounted servo amplifier, ideally matched to <strong>Baldor</strong>’s NextMove ES motion<br />
controller <strong>and</strong> range of cog free linear servo motors. Operating over a 18—56 V<strong>AC</strong> (25—80 VDC) bus,<br />
EuroFlex is ideally suited to low voltage applications such as in the medical <strong>and</strong> semi-conductor sectors.<br />
Rack Mount Solution<br />
EuroFlex is suited to <strong>Baldor</strong>'s multi-axis motion controller,<br />
NextMove ES, a rack mount card. Both cards are single<br />
EuroCard in length (160mm). NextMove ES can control up to<br />
2 axes of servo, plus a further 4 stepper axes.<br />
NextMove ES multi-axis<br />
motion controller<br />
> Technical Data<br />
Min/Max <strong>AC</strong> Supply<br />
Nominal DC Bus Supply<br />
Cont./Peak Current<br />
Digital Inputs<br />
Digital Outputs<br />
Analog Comm<strong>and</strong> Input<br />
Step <strong>and</strong> Direction Input<br />
Feedback<br />
Encoder Output<br />
Commutation<br />
Modes of Operation<br />
Communications<br />
1 or 3 phase 18-56 V<strong>AC</strong> 50/60Hz or 25-80 VDC<br />
25-80 VDC<br />
5/15 Amps (3 secs)<br />
Two Inputs: Enable, Reset (software configurable) - Opto-isolated (10-30VDC)<br />
One Output: Drive OK - opto-isolated<br />
±10V with 12-bit ADC resolution. Programmable <strong>for</strong> torque or velocity comm<strong>and</strong><br />
Single ended 5V TTL. 400MHz maximum frequency<br />
Commutating incremental encoder with encoder loss detection. Max. frequency 10 MHz<br />
Hall sensor (no encoder) <strong>for</strong> trapezoidal commutation<br />
Simulated encoder output <strong>for</strong> connection to external motion controller<br />
Sinusoidal commutation encoder<br />
Trapezoidal commutation with Hall sensors only<br />
Torque control, velocity control or step <strong>and</strong> direction<br />
Multi-drop RS485 <strong>for</strong> commissioning <strong>and</strong> diagnostics. RS232 optional
Change language