Operator's Manual High Pressure Breathing Air Compressors
Operator's Manual High Pressure Breathing Air Compressors
Operator's Manual High Pressure Breathing Air Compressors
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3.7.7. Filling the bottles<br />
28<br />
WARNING<br />
Never open filling valve unless bottle is connected<br />
to filling hose.<br />
Hose whipping due to pressurized air outstream can<br />
cause serious injury!<br />
-- First open filling valve. Fig. 22 and Fig. 23<br />
-- Then open bottle valve -- bottle will be filled. Drain condensate<br />
regularly during filling. On units with automatic condensate<br />
drain check that condensate is drained regularly.<br />
WARNING<br />
The filling procedure should not be interrupted for<br />
more than 10 minutes, to avoid high C0 2 values in<br />
the bottle air<br />
3.7.8. Removing the bottles.<br />
-- Upon reaching final bottle pressure close bottle valve first,<br />
then filling valve. Fig. 24 and Fig. 25<br />
-- Remove compressed air bottle.<br />
WARNING<br />
After removing the air bottle the filling hose should<br />
be secured back into its provided fitting. Never<br />
leave hoses without securing them.<br />
1.<br />
Fig. 22 Opening of filling valve<br />
Fig. 23 Opening of filling valve<br />
2.<br />
1.<br />
Fig. 24 Removing air bottle<br />
2.<br />
Fig. 25 Removing air bottle<br />
Operator’s <strong>Manual</strong><br />
2.<br />
1.<br />
2.<br />
1.