P-203N 3 Ports Wired Print Server - kamery airlive airlivecam

More documents

Recommendations

Info

9.4 Modify Setting Values – “set” Command “set” command is used to modify the setting values of this print server. The format of “set” command is as following: set argument_name value Then the value will be written into the system configuration. For example, if you want to set IP address of the print server to 192.168.2.2, type “set ip ‘192.168.2.2’” command and the IP of the print server will be changed: admin# set ip 192.168.2.2 If you enter only “set”, the system will list all arguments of “set” command and the command format. The following table lists all the arguments whose value can be modified by “set” command: Argument Description Example psname Print server name set psname PS001 password Login password set password 1234 username Login username set username admin ip IP of the print server set ip 192.168.2.2 gateway Default gateway of the set gateway 192.168.2. print server 254 submask Subnet mask of the print set submask 255.255. server 255.0 polling Polling interval (in Set polling 3 second) of the print server for waiting printing jobs on the NetWare server aq1 applezone Name of the printer queue set aq1 PQ1 on the NetWare server The name of AppleTalk set applezone Apple zone that this print server joins to Argument Description Example printertype1 SMBDG The type of the printer attached to this print server The name of the SMB group name that this print server joins to set printertype1 LaserW Riter set SMBDG default 91 AirLive P-203N User’s Manual
SNMPC SNMPL port1 DHCPS DHCP appletalk SMBD SNMP IPX LPD IPP RAW The administrator contact information of this print server for SNMP The installed location of this print server for SNMP The port name of this print server Enable or disable the DHCP server. The value should be “disabled” or “enabled”. Enable or disable to get dynamic IP by DHCP. The value should be “disabled” or “enabled”. Enable or disable AppleTalk printing The value should be “disabled” or “enabled”. Enable or disable SMB printing The value should be “disabled” or “enabled”. Enable or disable SNMP management protocol The value should be “disabled” or “enabled”. Enable or disable NetWare Bindery printing The value should be “disabled” or “enabled”. Enable or disable LPR printing The value should be “disabled” or “enabled”. Enable or disable IPP printing The value should be “disabled” or “enabled”. Enable or disable RAW printing The value should be “disabled” or “enabled”. set SNMPC sbdjohn@hotm ail.com set SNMPL Room301 set port1 lpt1 set DHCPS disable set DHCP disable set appletalk disable set SMBD enable set SNMP enable set IPX enable set LPD enable set IPP enable set RAW enable 92 AirLive P-203N User’s Manual
Page 1 and 2:
P-203N 3 Ports Wired Print Server U
Page 3 and 4:
CONTENTS 1. INTRODUCTION 1.1 PRODUC
Page 5 and 6:
8.5.2 Upgrade......................
Page 7 and 8:
1.2 Product Package This package co
Page 9 and 10:
Because print server supports IPX/S
Page 11 and 12:
UNIX (include HP/UX, SCO Unix, SunO
Page 13 and 14:
NetWare Network (see below) 8 AirLi
Page 15 and 16:
Chapter 13 In Windows XP SP2, you m
Page 17 and 18:
2. Hardware Installation 1. Unpack
Page 19 and 20:
3.2 Install Print Server driver and
Page 21 and 22:
6.The Print Server windows utilitie
Page 23 and 24:
3.3 Print Server Utilities After Pr
Page 25 and 26:
Please be aware that Network Ports
Page 27 and 28:
22 AirLive P-203N User’s Manual
Page 29 and 30:
Step5. Choose the suitable “Print
Page 31 and 32:
Step9. You have added the printer t
Page 33 and 34:
4.1 System Architecture In Windows
Page 35 and 36:
4.3 User Installation and Setup Aft
Page 37 and 38:
5.1 System Architecture We implemen
Page 39 and 40:
5.2 NetWare 3.x/4.x/5.x Installatio
Page 41 and 42:
14. Select Queues Serviced by Print
Page 43 and 44:
6.1 Introduction The print server i
Page 45 and 46: 6.3 Setup Print Server’s IP Addre
Page 47 and 48: 6.4 Verify Print Server’s IP Addr
Page 49 and 50: :rm=203.66.191.186:\ :rp=lpt1:\ :lf
Page 51 and 52: 7.2 Search for All Available Print
Page 53 and 54: 7.4 Setup the Print Server Click
Page 55 and 56: 7.6 TCP/IP Configuration Double Cli
Page 57 and 58: 7.7 Netware Print Server Configurat
Page 59 and 60: 7.9 Bonjour Configuration Bonjour t
Page 61 and 62: 7.11 SMB Configuration SMB Group Na
Page 63 and 64: Note that before you upgrade the fi
Page 65 and 66: Step 2: Select to enable required p
Page 67 and 68: 62 AirLive P-203N User’s Manual
Page 69 and 70: 8. Web Management 64 AirLive P-203N
Page 71 and 72: 8.2 Login You may use any Web Brows
Page 73 and 74: 8.3.2 Printer The Print Server can
Page 75 and 76: 8.3.4 SMB This page lists the SMB g
Page 77 and 78: 8.3.7 AppleTalk This page lists App
Page 79 and 80: 8.4.1.1 Admin Password It allows yo
Page 81 and 82: 8.4.2 TCP/IP You can configure the
Page 83 and 84: 8.4.4 SNMP The print server support
Page 85 and 86: 8.4.6 AppleTalk AppleTalk is a data
Page 87 and 88: 8.4.8 Save Settings You can click t
Page 89 and 90: 8.5.2 Upgrade You can upgrade new f
Page 91 and 92: 8.5.4 Restore System To apply the s
Page 93 and 94: 9.2 Login Execute the Telnet client
Page 95: applezone printertype1 SMBDG SNMPC
Page 99 and 100: get argument ipconfig reboot exit 9
Page 101 and 102: 10.2 System Setup 10.2.1 Print Serv
Page 103 and 104: of the URL is http://192.168.3.66:6
Page 105 and 106: 100 AirLive P-203N User’s Manual
Page 107 and 108: Step4. Click “Add” to add the n
Page 109 and 110: Step7. successfully. You can print
Page 111 and 112: Step1. Click “Yes” on the above
Page 113 and 114: Step4. The “Windows Firewall” s
Page 115 and 116: 13. Windows XP SP2 Setup In Windows
Page 117 and 118: Step4. Select “Exceptions” tab
Page 119: Step8. Click “Ok”. You have com
show all

P-203N 3 Ports Wired Print Server - kamery airlive airlivecam

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?