P-203N 3 Ports Wired Print Server - kamery airlive airlivecam

More documents

Recommendations

Info

9.3 Get Setting Values – “get” Command “get” command is used to get the setting values of this print server. The format of “get” command is as following: get argument Then the argument value will be displayed after the command. For example, if I want to get IP address of the print server, I type “get ip” command and the IP value “IP_ADDR=’192.168.2.2’” is displayed: admin# get ip IP_ADDR=’192.168.2.2’ If you enter “get” only, the system will list all available arguments of “get” command. The following table lists all the arguments whose value can be got by “get” command: Argument Description Example psname Print server name admin# get psname PORT1_PS=’PS254896’ password Login password admin# get password USER_PASSWORD=’1234’ username Login username admin# get username USER_NAME=’admin’ ip IP of the print server admin# get ip gateway submask Default gateway of the print server Subnet mask of the print server AP_ADDR=’192.168.2.2’ admin# get gateway DEFAULT_GATEWAY=’192.168. 2.254’ admin# get submask SUBNET_MASK=’255.255.255. 0’ Argument Description Example polling aq1 Polling interval (in second) of the print server for waiting printing jobs on the NetWare server admin# get polling PORT1_POLLTIME=3 Name of the printer queue admin# get aq1 89 AirLive P-203N User’s Manual
applezone printertype1 SMBDG SNMPC SNMPL port1 DHCPS DHCP appletalk SMBD SNMP IPX LPD on the NetWare server PORT1_QNAME=’PQ1’ The name of AppleTalk admin# get applezone zone that this print PORT1_APPLEAONE=’*’ server joins to The type of the printer admin# get printertype1 attached to this print PORT1_PRINTTYPE=’LaserWri server ter’ The name of the SMB group admin# get SMBDG name that this print SMBD_NAME=’default’ server joins to The administrator contact information of this print server for SNMP The installed location of this print server for SNMP The port name of this print server The DHCP server is enabled or disabled 0: disable 1: enable Get dynamic IP by DHCP is enabled or disabled 0: disable 1: enable AppleTalk printing is enabled or disabled 0: disable 1: enable SMB printing is enabled or disabled 0: disable 1: enable SNMP management protocol is enabled or disabled 0: disable 1: enable NetWare Bindery printing is enabled or disabled 0: disable 1: enable LPR printing is enabled or disabled 0: disable 1: enable admin# get SNMPC SNMP_CONTACT=’sbdjohn@hot mail.com’ admin# get SNMPL SNMP_LOCATION=’Room 301’ admin# get port1 PORT1_LPTNAME=’lpt1’ admin# get DHCPS DHCPD=0 admin# get DHCP DYNAMIC_IP=0 admin# get appletalk APPLE_ENABLE=0 admin# get SMBD SMBD_ENABLE=1 admin# get SNMP SNMP_ENABLE=1 admin# get IPX IPX_ENABLE=1 admin# get LPD LPD_ENABLE=1 Argument Description Example IPP RAW IPP printing is enabled or disabled 0: disable 1: enable RAW printing is enabled or disabled 0: disable 1: enable admin# get IPP IPP_ENABLE=1 admin# get RAW RAW_ENABLE=1 90 AirLive P-203N User’s Manual
Page 1 and 2:
P-203N 3 Ports Wired Print Server U
Page 3 and 4:
CONTENTS 1. INTRODUCTION 1.1 PRODUC
Page 5 and 6:
8.5.2 Upgrade......................
Page 7 and 8:
1.2 Product Package This package co
Page 9 and 10:
Because print server supports IPX/S
Page 11 and 12:
UNIX (include HP/UX, SCO Unix, SunO
Page 13 and 14:
NetWare Network (see below) 8 AirLi
Page 15 and 16:
Chapter 13 In Windows XP SP2, you m
Page 17 and 18:
2. Hardware Installation 1. Unpack
Page 19 and 20:
3.2 Install Print Server driver and
Page 21 and 22:
6.The Print Server windows utilitie
Page 23 and 24:
3.3 Print Server Utilities After Pr
Page 25 and 26:
Please be aware that Network Ports
Page 27 and 28:
22 AirLive P-203N User’s Manual
Page 29 and 30:
Step5. Choose the suitable “Print
Page 31 and 32:
Step9. You have added the printer t
Page 33 and 34:
4.1 System Architecture In Windows
Page 35 and 36:
4.3 User Installation and Setup Aft
Page 37 and 38:
5.1 System Architecture We implemen
Page 39 and 40:
5.2 NetWare 3.x/4.x/5.x Installatio
Page 41 and 42:
14. Select Queues Serviced by Print
Page 43 and 44: 6.1 Introduction The print server i
Page 45 and 46: 6.3 Setup Print Server’s IP Addre
Page 47 and 48: 6.4 Verify Print Server’s IP Addr
Page 49 and 50: :rm=203.66.191.186:\ :rp=lpt1:\ :lf
Page 51 and 52: 7.2 Search for All Available Print
Page 53 and 54: 7.4 Setup the Print Server Click
Page 55 and 56: 7.6 TCP/IP Configuration Double Cli
Page 57 and 58: 7.7 Netware Print Server Configurat
Page 59 and 60: 7.9 Bonjour Configuration Bonjour t
Page 61 and 62: 7.11 SMB Configuration SMB Group Na
Page 63 and 64: Note that before you upgrade the fi
Page 65 and 66: Step 2: Select to enable required p
Page 67 and 68: 62 AirLive P-203N User’s Manual
Page 69 and 70: 8. Web Management 64 AirLive P-203N
Page 71 and 72: 8.2 Login You may use any Web Brows
Page 73 and 74: 8.3.2 Printer The Print Server can
Page 75 and 76: 8.3.4 SMB This page lists the SMB g
Page 77 and 78: 8.3.7 AppleTalk This page lists App
Page 79 and 80: 8.4.1.1 Admin Password It allows yo
Page 81 and 82: 8.4.2 TCP/IP You can configure the
Page 83 and 84: 8.4.4 SNMP The print server support
Page 85 and 86: 8.4.6 AppleTalk AppleTalk is a data
Page 87 and 88: 8.4.8 Save Settings You can click t
Page 89 and 90: 8.5.2 Upgrade You can upgrade new f
Page 91 and 92: 8.5.4 Restore System To apply the s
Page 93: 9.2 Login Execute the Telnet client
Page 97 and 98: SNMPC SNMPL port1 DHCPS DHCP applet
Page 99 and 100: get argument ipconfig reboot exit 9
Page 101 and 102: 10.2 System Setup 10.2.1 Print Serv
Page 103 and 104: of the URL is http://192.168.3.66:6
Page 105 and 106: 100 AirLive P-203N User’s Manual
Page 107 and 108: Step4. Click “Add” to add the n
Page 109 and 110: Step7. successfully. You can print
Page 111 and 112: Step1. Click “Yes” on the above
Page 113 and 114: Step4. The “Windows Firewall” s
Page 115 and 116: 13. Windows XP SP2 Setup In Windows
Page 117 and 118: Step4. Select “Exceptions” tab
Page 119: Step8. Click “Ok”. You have com
show all

P-203N 3 Ports Wired Print Server - kamery airlive airlivecam

Create successful ePaper yourself

Delete template?

Save as template?