P-203N 3 Ports Wired Print Server - kamery airlive airlivecam
P-203N 3 Ports Wired Print Server - kamery airlive airlivecam P-203N 3 Ports Wired Print Server - kamery airlive airlivecam
8.5 System Tools 8.5.1 Load Default You can use this page to restore the factory default settings. All of your previous setup will be cleared. 83 AirLive P-203N User’s Manual
8.5.2 Upgrade You can upgrade new firmware for this print server in this page. Click “Browse” to select the new firmware in your storage and then click “OK”, the firmware will be updated in several minutes. Note that before you upgrade the firmware please make sure that the IP Address settings o the print server are in the same network as your computer. Be aware that if you have started upgrading firmware, you have to follow all the upgrading steps or the print server can’t turn back to normal configuration. 84 AirLive P-203N User’s Manual
- Page 37 and 38: 5.1 System Architecture We implemen
- Page 39 and 40: 5.2 NetWare 3.x/4.x/5.x Installatio
- Page 41 and 42: 14. Select Queues Serviced by Print
- Page 43 and 44: 6.1 Introduction The print server i
- Page 45 and 46: 6.3 Setup Print Server’s IP Addre
- Page 47 and 48: 6.4 Verify Print Server’s IP Addr
- Page 49 and 50: :rm=203.66.191.186:\ :rp=lpt1:\ :lf
- Page 51 and 52: 7.2 Search for All Available Print
- Page 53 and 54: 7.4 Setup the Print Server Click
- Page 55 and 56: 7.6 TCP/IP Configuration Double Cli
- Page 57 and 58: 7.7 Netware Print Server Configurat
- Page 59 and 60: 7.9 Bonjour Configuration Bonjour t
- Page 61 and 62: 7.11 SMB Configuration SMB Group Na
- Page 63 and 64: Note that before you upgrade the fi
- Page 65 and 66: Step 2: Select to enable required p
- Page 67 and 68: 62 AirLive P-203N User’s Manual
- Page 69 and 70: 8. Web Management 64 AirLive P-203N
- Page 71 and 72: 8.2 Login You may use any Web Brows
- Page 73 and 74: 8.3.2 Printer The Print Server can
- Page 75 and 76: 8.3.4 SMB This page lists the SMB g
- Page 77 and 78: 8.3.7 AppleTalk This page lists App
- Page 79 and 80: 8.4.1.1 Admin Password It allows yo
- Page 81 and 82: 8.4.2 TCP/IP You can configure the
- Page 83 and 84: 8.4.4 SNMP The print server support
- Page 85 and 86: 8.4.6 AppleTalk AppleTalk is a data
- Page 87: 8.4.8 Save Settings You can click t
- Page 91 and 92: 8.5.4 Restore System To apply the s
- Page 93 and 94: 9.2 Login Execute the Telnet client
- Page 95 and 96: applezone printertype1 SMBDG SNMPC
- Page 97 and 98: SNMPC SNMPL port1 DHCPS DHCP applet
- Page 99 and 100: get argument ipconfig reboot exit 9
- Page 101 and 102: 10.2 System Setup 10.2.1 Print Serv
- Page 103 and 104: of the URL is http://192.168.3.66:6
- Page 105 and 106: 100 AirLive P-203N User’s Manual
- Page 107 and 108: Step4. Click “Add” to add the n
- Page 109 and 110: Step7. successfully. You can print
- Page 111 and 112: Step1. Click “Yes” on the above
- Page 113 and 114: Step4. The “Windows Firewall” s
- Page 115 and 116: 13. Windows XP SP2 Setup In Windows
- Page 117 and 118: Step4. Select “Exceptions” tab
- Page 119: Step8. Click “Ok”. You have com
8.5.2 Upgrade<br />
You can upgrade new firmware for this print server in this page. Click<br />
“Browse” to select the new firmware in your storage and then click “OK”, the<br />
firmware will be updated in several minutes.<br />
Note that before you upgrade the firmware please make sure that the IP<br />
Address settings o the print server are in the same network as your computer.<br />
Be aware that if you have started upgrading firmware, you have to follow<br />
all the upgrading steps or the print server can’t turn back to normal<br />
configuration.<br />
84 AirLive P-<strong>203N</strong> User’s Manual
Change language