ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 3: Setup 3-17<br />
Multiple ROM Menu<br />
Move the cursor to Multiple ROM Menu and press Enter. The items on<br />
this submenu are used to load/unload specific ROMs in the next boot.<br />
1. Move the cursor to the appropriate Selectable ROM xoptionand<br />
press Enter.<br />
2. Select the desired setting from the drop-down menu.<br />
Disabled<br />
Enabled<br />
• Disabled – do not load ROM<br />
• Enabled – load ROM in next boot<br />
Note: Due to space limitations, only enable the required ROMs.<br />
<strong>Re</strong>fer to the following table for ROM usage information.<br />
ROM<br />
On-board Intel<br />
LAN<br />
Parallel CD-ROM<br />
Boot<br />
On-board Intel PXE<br />
WaveLAN<br />
WaveLAN PXE<br />
Use<br />
Intel Ethernet hardware-specific portion of the<br />
Ethernet Boot ROM. <strong>Re</strong>quires the On-board Intel<br />
PXE ROM to also be enabled.<br />
Allows reloading of OS through a CD ROM<br />
connected to the parallel port.<br />
PXE protocol portion of the Ethernet Boot ROM.<br />
<strong>Re</strong>quires the On-board Intel LAN ROM to also be<br />
enabled.<br />
Boot ROM for WaveLAN 802.11 PCMCIA card.<br />
<strong>Re</strong>quires WaveLAN PXE to also be enabled.<br />
PXE protocol ROM for use with the WaveLAN<br />
ROM.<br />
Beep Error Codes<br />
The Beep Error Codes option enables/disables beep codes on error(s).<br />
Move the cursor to Beep Error Codes, press Enter, and select On or Off.