ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3-12 Chapter 3: Setup<br />
Fdc On Lpt<br />
Use this option to enable the primary floppy on the parallel port.<br />
1. Move the cursor to Fdc On Lpt and press Enter.<br />
2. Select the desired setting from the drop-down menu.<br />
Disabled<br />
Enabled<br />
Floppy Disk Controller<br />
This option configures the Floppy Disk Controller. Since there is no<br />
floppy disk on the terminal, set this option to Disabled.<br />
Mode (Port C)<br />
This option sets the mode for serial port C.<br />
1. Move the cursor to Mode and press Enter.<br />
2. Select the desired setting from the drop-down menu.<br />
Normal<br />
IrDA<br />
ASK-IR