ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 3: Setup 3-9<br />
I/O Device Configuration<br />
The I/O Device Configuration option is used to configure peripheral<br />
devices.<br />
Move the cursor to I/O Device Configuration and press Enter to access<br />
the following submenu.<br />
PhoenixBIOS Setup Utility<br />
I/O Device Configuration<br />
Item Specific Help<br />
Main Exit Submenu<br />
Serial port A:<br />
[Auto]<br />
Scanner Power: [Auto]<br />
Serial port B:<br />
[Auto]<br />
Parallel port:<br />
[Auto]<br />
Mode:<br />
[Bi-directional]<br />
Fdc On Lpt:<br />
[Disabled]<br />
Floppy disk controller:<br />
[Disabled]<br />
Serial port C:<br />
[Enabled]<br />
Mode:<br />
[Normal]<br />
Base I/O Address: [220]<br />
Interrupt: [IRQ 5]<br />
Scanner Power: [Auto]<br />
Serial port D:<br />
[Enabled]<br />
Base I/O Address: [228]<br />
Interrupt: [IRQ 11]<br />
Mode:<br />
[RS-232]<br />
Disk-On-Chip Address: [CE00-CFFF]<br />
MSR Address:<br />
[CC00-CDFF]<br />
MSR Interrupt: [6]
Change language