ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 3: Setup 3-3<br />
How to Select Menu Options<br />
<strong>Re</strong>storing Factory Settings<br />
The following keyboard controls are used to select the various menu<br />
options and to make changes to their values.<br />
• Use the arrow keys to select (highlight) options and menu screens.<br />
• Use the + and - (or F5 and F6) keys to change field values.<br />
• To view help information on the possible selections for the<br />
highlighted item, press F1.<br />
• To save the changes, move the cursor to the Exit Menu, select either<br />
Save Changes & Exit or Save Changes, and press Enter.<br />
Note: If you are not using an external keyboard, you can touch the<br />
menu controls at the bottom of the screen. If you encounter difficulty<br />
doing this, recalibrate the screen.<br />
To automatically reset all values to their default settings for the current<br />
screen, press F9. The terminal automatically loads BIOS default CMOS<br />
values for boot up.<br />
To reset all BIOS settings to their default settings go to the Exit Menu,<br />
press F9, select either Save Changes & Exit or Save Changes, andpress<br />
Enter.<br />
See the BIOS Default Settings section later in this chapter for the preinstalled<br />
Setup defaults.
Change language