ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 1: Product Overview 1-29<br />
Other Integrated Devices and Indicators<br />
Hard Disk Drive<br />
A 2.5" IDE Hard Disk is included. The drive is the standard type that is<br />
usedbynotebookPCs.Theharddrivecanbeupgradedorreplaced<br />
through a special service access panel on the back of the unit. The hard<br />
drive interfaces through the primary IDE connection on the processor<br />
board.<br />
<strong>Re</strong>set Switch<br />
The <strong>Re</strong>set Switch is provided as a last resort to reboot the system if the<br />
software reset port mechanisms fail. This switch is located on the row<br />
of connectors that are located at the bottom of the enclosure. Although<br />
not intended to be easily accessible, the reset switch can be operated<br />
without removing covers or using any special tools.<br />
Note: On early models, there may be a hole in the cabinet providing<br />
access to the <strong>Re</strong>set Switch.<br />
<strong>Re</strong>set Switch<br />
18373<br />
<strong>Re</strong>set Procedure<br />
1. Press the <strong>Re</strong>set Switch and hold it in for more than 4 seconds. The<br />
screen goes blank.<br />
2. Press the <strong>Re</strong>set Switch again. The system then reboots.