ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5-2 Chapter 5: BIOS Updating Procedures<br />
Updating Procedures<br />
Note: If your terminal has an internal CD-ROM drive installed, skip to<br />
step three.<br />
1. Connect the external CD-ROM (2336-K007) drive to the parallel<br />
port on the terminal.<br />
2. Connect the opposite end of the CD-ROM cable (end with the<br />
power connector pigtail) to the CD-ROM drive parallel connector.<br />
Parallel Connector<br />
Power<br />
Connector<br />
Parallel Connector<br />
Note: The parallel port on the <strong>7455</strong> is the Customer Display port.<br />
Therefore, if your terminal is configured with a Customer Display,<br />
you must temporarily disconnect it in order to use the CD-ROM<br />
drive.<br />
18614
Change language