ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4-10 Chapter 4: Operating System <strong>Re</strong>covery<br />
10. The directory that Ghost is now looking in should be Z: (if not,<br />
switch to Z). Select the File name to load image from file<br />
(nnnnnnn.gho) and press Enter.<br />
11. Select the Local Destination Drive and press Enter.<br />
12. Set the size of the 1st partition (which is FAT16) to the desired<br />
amount.<br />
Note: In order to do this, you may need to clear the amount from<br />
the 2nd partition.<br />
13. Set the size of the 2nd partition.<br />
O/S 2 nd Partition Format 2 nd Partition Size<br />
Windows NT NTFS Fill the remaining drive space<br />
Windows 98 FAT32 Fill the remaining drive space<br />
Windows<br />
2000<br />
FAT32 Fill the remaining drive space<br />
DOS FAT16 2GB<br />
14. Press Enter.<br />
15. If you are recovering from Win9x, it is likely that the 2nd partition<br />
will be too small for FAT32. If so, a dialog is displayed<br />
Converting partition from FAT32 to FAT, proceed<br />
Choose Yes.<br />
16. At the next dialog box,<br />
Proceed with disk load Destination drive will be<br />
permanently overwritten,<br />
Choose Yes to start the recovery process.
Change language