ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4-4 Chapter 4: Operating System <strong>Re</strong>covery<br />
Completing the OS Installation (Windows NT)<br />
The system automatically reboots when the image recovery is complete<br />
and starts the software installation. This installation also installs most<br />
of the additional software and drivers that are included in the disk<br />
image. Complete the installation as follows.<br />
1. After the terminal reboots, press Next at the Windows Setup screen.<br />
2. Accept the Microsoft license agreement.<br />
3. Enter the User Name and Organization.<br />
4. Enter the Computer Name for the client.<br />
5. Enter the Administrator’s Account Password (optional).<br />
6. When prompted, press Finish to reboot the client.<br />
7. Loginwhenprompted.<br />
8. Open the Control Panel and run the MicroTouch screen calibration.<br />
Completing the OS Installation (Windows 98)<br />
The system automatically reboots when the image recovery is complete<br />
and starts the software installation. This installation also installs most<br />
of the additional software and drivers that are included in the disk<br />
image. Complete the installation as follows.<br />
1. When the terminal boots it enters the Windows setup routine.<br />
2. At the User Information screen, enter the User information. This<br />
can be done using a keyboard or you can use the touch screen<br />
keyboard. After entering the information, press Enter or touch OK.<br />
3. Open Control Panel and set the terminal Date and Time.<br />
4. In the Control Panel, run the MicroTouch screen calibration (if<br />
touch-screen equipped).
Change language