ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data

Chapter 4: Operating System Recovery 4-3
7. Enter whether or not you want to perform Disk verification.
(Answering Yes takes twice as long, but is recommended.)
If Yes is selected:
• The Ghost ® software verifies write operations and handles bad
FAT clusters.
• The Ghost error file (GHOST.ERR) is displayed before
rebooting.
If No is selected:
• The Ghost error file is displayed before rebooting only if Ghost
aborts.
Caution: If the error file is displayed, the batch file pauses for
user input before rebooting. You may use Ctrl-C to cancel out
of the batch file if you want to see the error file again, but
nothing should be done that writes to the hard disk before
rebooting. GHOST.ERR is on the RAM disk and is lost on
reboot.
8. Select which type of recovery you want to perform (normally
option #1).
1) Redo entire disk with the first partition the same size.
2) Redo the first OS partition.
3) Redo the second OS partition.
The Ghost software then begins the disk recovery from the CD. It
displays a progress bar and gives you an estimate how long the
process should take.
When the recovery process is completed, the client hard disk is
restored to its preinstalled condition, as originally received from
the factory.
9. At the completion of the recovery process remove the CD and press
Enter to reboot the terminal.