ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
ncr/doc/RealPOS/7455/Technical_Manuals/7455_Re... - Alsys Data
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 3: Setup 3-29<br />
IDE Drive x Monitoring<br />
This option enables IDE device activity to keep the system awake.<br />
1. Move the cursor to IDE Drive x Monitoring and press Enter.<br />
2. Select the desired setting from the drop-down menu.<br />
Disabled<br />
Enabled<br />
PCI Bus Monitoring<br />
This option enables activity on the PCI bus to keep the system awake.<br />
1. Move the cursor to PCI Bus Monitoring and press Enter.<br />
2. Select the desired setting from the drop-down menu.<br />
Disabled<br />
Enabled<br />
Video Power State Control<br />
Use this option to configure the video power state behavior.<br />
1. Move the cursor to Video Power State Behavior and press Enter.<br />
2. Select the desired setting from the drop-down menu.<br />
Auto<br />
Off<br />
Standby<br />
Suspend<br />
• Auto – video power state is always the same as the system<br />
• Off, Suspend, Standby – video is set to Off, Suspend, or Standby<br />
state during all system low-power transitions
Change language