Rotary Seals - Dilanda.it

More documents

Recommendations

Info

Turcon ® Roto Glyd Ring ® n Installation of Turcon ® Roto Glyd Ring ® Installation instructions The following points should be observed before installation of the seals: - Check whether housing or rod has a lead-in chamfer; if not, use an installation sleeve - Deburr and chamfer or round sharp edges, cover the tips of any screw threads - Remove machining residues such as chips, dirt and other foreign particles and carefully clean all parts Installation of Turcon ® Roto Glyd Ring ® in closed grooves “Internal sealing“ The installation of our seal elements is unproblematical. - Place the O—Ring into the groove (avoid twisting the ring!) - Compress the Turcon ® Roto Glyd Ring ® into a kidney shape. The seal must have no sharp bends - The seals can be installed more easily if they are greased or oiled. Attention must be paid to the compatibility of the seal materials with these lubricants. Use only grease without solid additives (e.g. molybdenum disulphide or zinc sulphide) - Do not use installation tools with sharp edges Installation of Turcon ® Roto Glyd Ring ® in split grooves “Internal and external sealing“ Installation in split grooves is simple. During final assembly - insertion of the rod - the Turcon ® Roto Glyd Ring ® must be sized. The rod itself can be used for this purpose, provided it has a long lead-in chamfer. Alternatively a corresponding mandrel can be used. Figure 86 Kidney-shaped deformation of the seal ring - Place the seal ring in compressed form into the groove and push against the O—Ring in the direction of the arrow (Figure 87) Figure 85 Installation in a split groove The following installation sequence is recommended: - Pull the O—Ring onto the Roto Glyd Ring ® - Press the seal element into the groove. The O—Ring must not be allowed to twist Figure 87 Inserting the seal ring into the closed groove - Finally size the seal ring using a mandrel which should have a chamfer of 10° to 15° over a length of approx. 30 mm 192 Latest information available at www.busakshamban.com Edition April 2006
Turcon ® Roto Glyd Ring ® 30 10 -15 dN blend radius, polished Figure 88 Sizing of the installed seal The rod itself can also be used for sizing, provided that it has a sufficiently long lead-in chamfer as per our recommendations in Table LVI. Sizing mandrels should be made from a polymer material (e.g. polyamide). In order to avoid damage to the seals, a smooth surface with rounded and polished lead-in chamfer is necessary. Latest information available at www.busakshamban.com Edition April 2006 193
Page 1 and 2:
Rotary Seals Deutsch Your Partner f
Page 3 and 4:
Rotary Seal General description ...
Page 5 and 6:
Rotary Seal n GENERAL DESCRIPTION T
Page 7 and 8:
Rotary Seal V—Rings Family V—Ri
Page 9 and 10:
Rotary Seal PTFE Rotary Shaft seals
Page 11 and 12:
Rotary Seal n Introduction Rotating
Page 13 and 14:
Rotary Seal Shaft run out and eccen
Page 15 and 16:
Rotary Seal n Quality criteria The
Page 17 and 18:
Rotary Seal n Design instructions A
Page 19 and 20:
Rotary Seal Surface finish In order
Page 21 and 22:
Radial Oil Seal Sealing element Mat
Page 23 and 24:
Radial Oil Seal Fluorinated Rubber
Page 25 and 26:
Radial Oil Seal Metal case The prin
Page 27 and 28:
Radial Oil Seal Peripheral speed an
Page 29 and 30:
Radial Oil Seal n Shaft and housing
Page 31 and 32:
Radial Oil Seal n Standard types of
Page 33 and 34:
Radial Oil Seal Table VI Materials
Page 35 and 36:
Radial Oil Seal Dimension Part no.
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Radial Oil Seal n Busak+Shamban typ
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Radial Oil Seal Ordering example oi
Page 69 and 70:
Radial Oil Seal Table X Materials S
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Radial Oil Seal n Special types of
Page 95 and 96:
Radial Oil Seal Table XVIII Materia
Page 97 and 98:
Radial Oil Seal Table XIX Materials
Page 99 and 100:
Radial Oil Seal Ordering example oi
Page 101 and 102:
Radial Oil Seal Table XXI Materials
Page 103 and 104:
Radial Oil Seal n STEFA type 12CC -
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Radial Oil Seal n Rotary and axial
Page 115 and 116:
Radial Oil Seal n Product descripti
Page 117 and 118:
Radial Oil Seal n STEFA standard AP
Page 119 and 120:
Radial Oil Seal n STEFA 1B/APJ and
Page 121 and 122:
End Cover n END COVER General descr
Page 123 and 124:
End Cover Bore D H8 Width B Chamfer
Page 125 and 126:
End Cover n Busak+Shamban type YJ 3
Page 127 and 128:
Shaft Repair Kit n SHAFT REPAIR KIT
Page 129 and 130:
Shaft Repair Kit n Installation rec
Page 131 and 132:
Shaft Repair Kit n Installation rec
Page 133 and 134:
Shaft Repair Kit Shaft diameter imp
Page 135 and 136:
Shaft Repair Kit Shaft diameter imp
Page 137 and 138:
Cassette Seal n System 3000 n Syste
Page 139 and 140:
Cassette Seal ID d 1 OD Width Syste
Page 141 and 142:
Cassette Seal Temperature limits fo
Page 143 and 144: Cassette Seal Shaft run out Shaft r
Page 145 and 146: Cassette Seal System 5000 The Syste
Page 147 and 148: V—Ring 70 65 60 d=190 V-Rings in
Page 149 and 150: V—Ring recommended to arrange an
Page 151 and 152: V—Ring The power losses are influ
Page 153 and 154: V—Ring n Dimension table - V—Ri
Page 155 and 156: V—Ring For shaft diameter d 1 Ins
Page 161 and 162: V—Ring Ordering example V—Ring,
Page 169 and 170: V—Ring V—Ring AX larger than 20
Page 171 and 172: GAMMA Seal Figure 64 70 TBP/RB RB 5
Page 173 and 174: GAMMA Seal b b ø d + 0.5 ø d Figu
Page 175 and 176: GAMMA Seal Table XLVII Materials St
Page 177 and 178: GAMMA Seal n GAMMA-seal type TBR/9R
Page 179 and 180: Axial Shaft Seal n AXIAL SHAFT SEAL
Page 181 and 182: Axial Shaft Seal n Applications Fie
Page 183 and 184: Axial Shaft Seal Design instruction
Page 185 and 186: Axial Shaft Seal Shaft Dimensions M
Page 187 and 188: Axial Shaft Seal Ordering example A
Page 189 and 190: Axial Shaft Seal Shaft Dimensions M
Page 191 and 192: Turcon ® Roto Glyd Ring ® n TURCO
Page 193: Turcon ® Roto Glyd Ring ® Table L
Page 197 and 198: Turcon ® Roto Glyd Ring ® Materia
Page 199 and 200: Turcon ® Roto Glyd Ring ® Table L
Page 201 and 202: Turcon ® Roto Glyd Ring ® Orderin
Page 203 and 204: Turcon ® Roto Glyd Ring ® Table L
Page 205 and 206: Turcon ® Roto Glyd Ring ® Orderin
Page 207 and 208: Turcon ® Roto Variseal ® n TURCON
Page 209 and 210: Turcon ® Roto Variseal ® blend ra
Page 211 and 212: Turcon ® Roto Variseal ® n Instal
Page 213 and 214: Latest information available at www
Page 220: For further information: Europe Tel
show all

Rotary Seals - Dilanda.it

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?