View - Lyndex-Nikken

FLUIDHEADS
Nikken FLUIDHEADS Features
Prolonged Tool Life
Cutting tool life is increased by coolant being directly
applied to the cutting edge. Direct coolant prevents
brazed tool breakage by reducing the heat factor.
Improved Holemaking
Lyndex FluidHeads facilitate hole drilling by delivering
coolant to the point of contact. The drilling-associated
heat factor is eliminated, so there is no heat-related
warping. In addition, chips are immediately evacuated
to prevent chips from annealing to the cutting tool
and the workpiece wall.
Greater Feeds and Speeds
Direct coolant applied to the tool's cutting edge
provides lubrication, promotes superior chip breakage
and evacuation, and prevents double-cutting of chips.
These factors allow for greater feeds and speeds,
increasing productivity.
Advanced Multi-Seal Construction
Lyndex FluidHeads unique multi-seal construction
incorporates a series of O-rings, labyrinth and synthetic
seals, and sealed high-speed roller bearings to provide
precise trouble-free operation. They also feature our
tough corrosion-resistant surface treatment to assure
a long life.
Quick and Simple Setup
Lyndex provides you with a vernier scale for ease
of orientation. Vernier scales help to orient the
positioning pin and drive key slots (0-360°) to match
your machining center’s spindle and automatic tool
changer configuration. The adjustable positioning
pin will also allow you to easily adjust the height to
eliminate most variances in distance between the
spindle’s face and positioning pin.
Special orders are available upon request.
20