View - METZNER Maschinenbau GmbH

More documents

Recommendations

Info

Properties and features Large range of circular knives and cutting wheels All circular knife cutting machines in the »CCM series« can be fitted with various circular knives, allowing optimum cut quality. The continuously variable saw motors work at a range of rotation speeds, from 1,000 - 6,000 rpm or 4,000 - 10,000 rpm. Therefore cutting wheels with a grinding function can be used as well as circular knives. Additional cutting tools All circular knife cutting machines are equipped for the use of an additional cutting tool. This makes the Metzner circular cutting machine a real all-rounder that can also be used for materials without steel-reinforcement. 6
Micro spray system and cooling water system The »Metzner CCM 4« comes with a cooling lubrication system or a micro spray system as standard. Lubricating the circular blade ensures that the cut quality, when cutting steel-reinforced profiles, is significantly increased. The water or cooling lubricant is usually used in a closed cycle. In the process shavings and particle matters are filtered out. Intelligent gap detection With optional automatic gap detection, the »CCM 4« and »CCM 6« detect the gaps in steel carrier underneath the rubber. The cutting position is regulated automatically in the gaps. This means that the machines cut without burrs and provides considerable protection for the circular blade. Profile clamp for optimum cutting result The optional profile clamp ensures that the plastic profile is fixed in the best position during cutting. This decreases the chance of the profile being distorted. The profile clamp also allows complex profile contours to be cut at a very high quality. 7
Page 1 and 2: Metzner CCM High performance circul
Page 3 and 4: Individual possible uses Flexible m
Page 5: Metzner CCM 2 Economical circular k
Page 10 and 11: Technical Data Performance Data Met
Page 12: Metzner Maschinenbau GmbH Messersch

View - METZNER Maschinenbau GmbH

Create successful ePaper yourself

Delete template?

Save as template?