View - METZNER Maschinenbau GmbH

More documents

Recommendations

Info

Technical Data Performance Data Metzner CCM 2 Metzner CCM 4 Metzner CCM 6 Material dimension max. (circular knife cut) 100 x 30mm (WxH) 1) 100 x 30mm (WxH) 1) 100 x 30 mm (BxH) 1) Material dimension max. (die cut) 100 x 30mm (WxH) 1) 100 x 30 mm (BxH) 1) 100 x 30 mm (BxH) 1) Circular knife rotation speed range (rpm) 1,000 - 6,000 or 4,000 - 10,000 1,000 - 6,000 or 4,000 - 10,000 1,000 - 6,000 or 4,000 - 10,000 Circular knife penetration speed max. 30 m/min 30 m/min 30 m/min Size increments 0.1mm 0.1mm 0.1mm Typical repeatability exactness 2) ± 0.1% - ± 0.3% ± 0.1% - ± 0.3% ± 0.1% - ± 0.3% Technical Data Electrical connection 3~400 V, 50/60 Hz, 16 A 3~400 V, 50/60 Hz, 16 A 3~400 V, 50/60 Hz, 25 A Compressed air connection 3) 6 bar 6 bar 6 bar Dimensions (LxWxH) 2060 x 750 x 1680mm 1840 x 1220 x 2250mm 4370 x 1500 x 2200mm Weight 400 kg 800 kg 1500 kg 1) additional optional dimensions possible | 2) depending on material; tolerance min. ± 0.5mm | 3) only necessary with die cut Specifications are subject to change without notice. 10
Equipment possibilities Metzner CCM 2 Metzner CCM 4 Metzner CCM 6 Red-Green-Blue Equipment Level Red Green Blue Red Green Blue Feeding speed (m/min) 60 60 120 60 60 120 60 Cutting rate »circular knife cut« max. (cuts/min) 100 4) 100 4) 100 4) 100 4) 100 4) 100 4) 65 5) Cutting rate »die cut« max. (cuts/min) 100 4) 100 4) 100 4) 100 4) 100 4) 100 4) 65 5) Controls 6) PLC PLC S7 PLC PLC S7 S7 Cooling water circulation - - - • • • - Minimum quantity lubrication ¢ ¢ ¢ ¢ ¢ ¢ ¢ Integral interface for peripheral equipment - • • - • • • Integration into factory IT network - • • - • • • Further equipment possibilities Red Green Blue Red Green Blue Gap detection - ¢ ¢ - ¢ ¢ ¢ Profile clamping - ¢ ¢ - ¢ ¢ ¢ Additional cutting tool - ¢ ¢ ¢ ¢ ¢ ¢ Length measuring system - ¢ ¢ - ¢ ¢ ¢ Cutting based on marking - ¢ ¢ - ¢ ¢ ¢ Automatic scrap cut - ¢ ¢ - ¢ ¢ ¢ E-Service Module - - ¢ - - ¢ ¢ 4) at cutting length 100mm | 5) at cutting length 300mm | 6) PLC = Metzner PLC-controls with 5.7” colour touch-screen and CoDeSys programming, S7 = Siemens S7 PLC-controls with 5.7” colour touch-screen | • = standard, ¢ = optional, - = not available | Specifications are subject to change without notice. 11
Page 1 and 2: Metzner CCM High performance circul
Page 3 and 4: Individual possible uses Flexible m
Page 5 and 6: Metzner CCM 2 Economical circular k
Page 7 and 8: Micro spray system and cooling wate
Page 12: Metzner Maschinenbau GmbH Messersch

View - METZNER Maschinenbau GmbH

Create successful ePaper yourself

Delete template?

Save as template?