11.01.2015 Views

Cisco Catalyst 4948 10 Gigabit Ethernet Switch

Cisco Catalyst 4948 10 Gigabit Ethernet Switch

Cisco Catalyst 4948 10 Gigabit Ethernet Switch

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Data Sheet<br />

● TCP-MIB.my<br />

● UDP-MIB.my<br />

● RIP SNMP MIB<br />

● LLDP MIB<br />

Industry Standards<br />

● <strong>Ethernet</strong>: IEEE 802.3 and <strong>10</strong>BASE-T<br />

● Fast <strong>Ethernet</strong>: IEEE 802.3u, <strong>10</strong>0BASE-TX, and <strong>10</strong>0BASE-FX<br />

● <strong>Gigabit</strong> <strong>Ethernet</strong>: IEEE 802.3z and 802.3ab<br />

● IEEE 802. 1D Spanning Tree Protocol<br />

● IEEE 802.1w rapid reconfiguration of spanning tree<br />

● IEEE 802. 1s multiple VLAN instances of spanning tree<br />

● IEEE 802.3 ad LACP<br />

● IEEE 802. 1p CoS prioritization<br />

● IEEE 802.1Q VLAN<br />

● IEEE 802. 1x user authentication<br />

● X2 support<br />

● RMON I and II standards<br />

Indicators and Ports<br />

● System status: Green (operational), or red (faulty)<br />

● Console: RJ-45 socket<br />

● Reset (switch recessed for protection)<br />

● Uplinks: Link and active<br />

● Image management port: <strong>10</strong>/<strong>10</strong>0BASE-TX (RJ-45 socket) data terminal equipment (DTE); green (good),<br />

orange (disabled), or off (not connected)<br />

Supported X2 Optics<br />

Table 3 lists the X2 optics supported by the <strong>Cisco</strong> <strong>Catalyst</strong> <strong>4948</strong> <strong>10</strong> <strong>Gigabit</strong> <strong>Ethernet</strong> <strong>Switch</strong>.<br />

Table 3.<br />

Type<br />

LR<br />

CX4<br />

LX4<br />

SR<br />

ER<br />

LRM<br />

ZR<br />

DWDM<br />

X2 Optics Supported by <strong>Cisco</strong> <strong>Catalyst</strong> <strong>4948</strong> <strong>10</strong> <strong>Gigabit</strong> <strong>Ethernet</strong> <strong>Switch</strong><br />

Maximum Distance over Specified Medium<br />

<strong>10</strong> km on single-mode fiber (SMF) (G.652)<br />

Up to 15m on IBX4 cable<br />

300m on multimode fiber (MMF)<br />

26 to 300m on MMF (depends on MMF type)<br />

40 km on SMF<br />

220m on MMF<br />

1550 nm on SMF<br />

1530.33 nm to 1560.61 nm X2 (<strong>10</strong>0-GHz ITU grid)<br />

© 2009 <strong>Cisco</strong> Systems, Inc. All rights reserved. This document is <strong>Cisco</strong> Public Information. Page 11 of 17

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!