SB-Motor - Orbit Motion Technologies
SB-Motor - Orbit Motion Technologies
SB-Motor - Orbit Motion Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
M_SicherhMax_us.FM<br />
Korrekturausdruck<br />
1.4 General Safety Instructions<br />
� DIN EN 292 sections 1 (11/1991) and 2 (6/1995) - machine<br />
safety: basics, general design rules.<br />
� Universally valid rules for safety and accident prevention.<br />
� Start-up operation is not allowed until it has been proved that the<br />
machine in which the products are installed complies with the<br />
rules of EC directive 89/392/EEC (machine directive).<br />
� Operation is only permitted if the national EMT requirements for<br />
the respective application are fulfilled. In the EU, the valid EMT<br />
directive is 89/336/EEC.<br />
� DIN EN 50178 (4/1998) - equipment of high-voltage systems<br />
with electronic operating means.<br />
1.4 General Safety Instructions<br />
In addition to this manual, please observe<br />
� the prohibiting, warning and mandatory signs as well as the<br />
warnings on the components in the switching cabinet,<br />
� the corresponding laws and regulations,<br />
� the legal requirements concerning accident prevention,<br />
� the operating instructions for the other components.<br />
Always keep the operating manuals close to the machine.<br />
The following safety instructions must be observed.<br />
� These safety instructions must be read and applied by all persons<br />
involved in the commissioning, operation, maintenance<br />
and repair of the machine.<br />
� In addition to the notes in this manual, observe the universally<br />
valid local and national regulations for safety and accident prevention.<br />
� Before doing any work on the equipment, the machine’s power<br />
supply must be turned off and locked out.<br />
� After installation, commissioning or maintenance work on the<br />
machine, the protection measures provided must be tested.<br />
� Omit anything that might affect the safety of the machine.<br />
� Unauthorized modification or manipulation of the equipment is<br />
prohibited for safety reasons.<br />
� Those responsible for the safety of the plant must guarantee that<br />
– only qualified staff are entrusted with work on the appliances<br />
and machines<br />
– the operating manual is available at all times, and that the<br />
workers follow the manual’s guidelines.<br />
– unqualified workers are forbidden to work on the equipment<br />
PacDrive page 7
Change language