SB-Motor - Orbit Motion Technologies

More documents

Recommendations

Info

6 Maintenance 6.7 Commissioning Unpacking and checking the devices Installation Devices electrically attach Examination of the safety functions further commissioning according to the concrete system We recommend to take up with the first commissioning ELAU personnel. This should not only occur for guarantee reasons, but � the equipment checked, � which determines optimal configuration, � the service personnel is instructed at the same time. Procedure After removing the packing you check please the devices for soundness. Only intact devices may be put into operation. Check please additionally the supply for completeness. Compare the data on the basis the identification plates. Install afterwards the devices considering of the request to the setting up place, the enclosure and the EMC rules Attach they now the devices, beginning with protective grounding. Make sure they that all clamps are fixed tightened, which are used necessary cable diameters the screen were correctly executed and no interruptions and short-circuits to be present. - To motor thermojunction or PTC. - Functions the brake, if available? - Does the emergency stop chain function? - Do the emergency stop limit switches function? See operating instruction of the packaging machine manufacturer and the MotorControllers. Table 6-1: Procedure of the first commissioning see „Transportation, Storage, Unpacking” see „Maintenance” see „Techncal Data“ and „Maintenance“ page 28 SB-Motor PacDrive Korrekturausdruck MSB_OpMan_06_us.FM
MSB_OpMan_06_us.FM Korrekturausdruck 6.8 Configuration / Programming 6.8 Configuration / Programming The motors are adjusted with ELAU. The customer does not have to execute alignment. The adjustment of the MotorControllers to the motors is to be inferred from the documentation of the respective MotorController. See also the documentation of the MotorController. PacDrive SB-Motor page 29
Page 1 and 2: SB-Motor Operating Manual including
Page 3 and 4: MSB_OperaMan_us0110IVZ.FM Korrektur
Page 5 and 6: M_SicherhMax_us.FM Korrekturausdruc
Page 13 and 14: M_VerwendStd_us.FM Korrekturausdruc
Page 15 and 16: MSB_OpMan_03_us.FM Korrekturausdruc
Page 27: MSB_OpMan_06_us.FM Korrekturausdruc
Page 79 and 80:
MSB_OpMan_07_us.FM Korrekturausdruc
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
M_AnhangStd_us.FM Korrekturausdruck
Page 117 and 118:
M_AnhangStd_us.FM Korrekturausdruck
Page 119 and 120:
MSB_OpManAen_us.FM Korrekturausdruc
Page 121 and 122:
MSB_OperaMan_us0110SIX.fm Korrektur
Page 123 and 124:
ELAU_FoStoerung_us.fm Korrekturausd
show all

SB-Motor - Orbit Motion Technologies

Create successful ePaper yourself

Delete template?

Save as template?