SB-Motor - Orbit Motion Technologies

More documents

Recommendations

Info

1 Safety DANGER! Potentially dangerous movements! Life hazard, serious injury or material damage! � The monitoring functions in the driving components to a large extent rule out malfunction. For your protection, you must not rely on these functions alone. Until the controls installed become effective, you should anticipate faulty movement of the drive, which can vary depending on the kind of malfunction and the operating state. Personal protection must be ensured by additional measures superior to the plant. These are planned by the plant engineer with regard to the specific circumstances of the plant and after a risk and error analysis. The safety provisions of the plant are taken into account. � No persons are allowed within the motion range of the machine. This is to be ensured by means of devices like protective fences, grids, covers or photoelectric barriers. � The fences and covers must be sufficiently strong to withstand the maximum possible motion energy. � The emergency stop switch must be located very close to the operator. Check the operation of the emergency stop before starting up the plant. � Secure against unintentional start by enabling the mains contactor of the drives via an emergency off circuit or by means of the function ’safe stop’. � Before accessing the danger zone, bring the drives to a safe stop. � To work on the plant, power must be turned off and locked out. � Avoid operating high-frequency, remote-control and radio devices in the vicinity of the plant’s electronics and connecting wires. If the use of those devices is inevitable, check system and plant for possible malfunctions before first operation. In some cases a special EMT check may be necessary. page 12 PacDrive Korrekturausdruck M_SicherhMax_us.FM
M_VerwendStd_us.FM Korrekturausdruck 2 Use of This Operating Manual 2.1 Target Group 2.1 Target Group This operating manual is aimed exclusively at technically qualified staff with detailed knowledge in the field of automation technology. Only qualified staff can understand the significance of the safety notes and act accordingly. This operating manual is aimed primarily at design and application engineers specializing in mechanical and electrical engineering, at programmers, service and commissioning engineers. NOTE Should you not be able to solve problems with the help of this manual, please contact ELAU AG - Abteilung Kundendienst - Postfach1255 D-97821 Marktheidenfeld Telefon: 09391/606-142 Fax: 09391/606-300 2.2 Depiction Conventions Symbol Meaning � Marks the first level of an enumeration. – Marks the second level of an enumeration. � Marks instructions for an action. normal Normal text. italics Marks a special term (e.g. parameter). Code Program code Table 2-1: Depiction conventions PacDrive page 13
Page 1 and 2: SB-Motor Operating Manual including
Page 3 and 4: MSB_OperaMan_us0110IVZ.FM Korrektur
Page 5 and 6: M_SicherhMax_us.FM Korrekturausdruc
Page 11: M_SicherhMax_us.FM Korrekturausdruc
Page 15 and 16: MSB_OpMan_03_us.FM Korrekturausdruc
Page 63 and 64:
MSB_OpMan_07_us.FM Korrekturausdruc
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
M_AnhangStd_us.FM Korrekturausdruck
Page 117 and 118:
M_AnhangStd_us.FM Korrekturausdruck
Page 119 and 120:
MSB_OpManAen_us.FM Korrekturausdruc
Page 121 and 122:
MSB_OperaMan_us0110SIX.fm Korrektur
Page 123 and 124:
ELAU_FoStoerung_us.fm Korrekturausd
show all

SB-Motor - Orbit Motion Technologies

Create successful ePaper yourself

Delete template?

Save as template?