SB-Motor - Orbit Motion Technologies

More documents

Recommendations

Info

1 Safety DANGER! High voltage! Life hazard! � Observe the unversally valid construction and safety rules for working on high-voltage units. � After installation, check the fixed connection of the earth conductor on all electric appliances according to the connection plan. � Operation, even for short-term measuring and test purposes, is only permitted with an earth conductor firmly connected to all electric components. Otherwise high voltages may occur on the casing. � Before accessing electrical parts with voltages exceeding 50 Volts, disconnect the unit from mains or power supply and lock it out. After switching off, wait for at lest 5 minutes before touching any components. � Do not touch electrical connections of the components while the unit is on. � Before switching on the unit, cover all voltage carrying parts to prevent accidental contact. � Provide for protection against indirect touching (EN 50178 / 1998 section 5.3.2). DANGER! High leak current! Life hazard! � Before switching on, first earth the electric equipment, each drive control and power supply unit and the motor or connect them to the central earthing point via a an earth conductor. � The leak current is greater than 3.5 mA. Therefore the units must have a firm connection to the power grid (according to DIN EN 50178 / 1998 - equipment of high-voltage systems). � Before initial operation, even for test purposes, always connect the earth conductor. Otherwise high voltage may occur on the casing. page 10 PacDrive Korrekturausdruck M_SicherhMax_us.FM
M_SicherhMax_us.FM Korrekturausdruck 1.5.3 "Safely Separated Low Voltages" 1.5 Residual Risks Signal voltage and control voltage of the PacDrive units are
Page 1 and 2: SB-Motor Operating Manual including
Page 3 and 4: MSB_OperaMan_us0110IVZ.FM Korrektur
Page 5 and 6: M_SicherhMax_us.FM Korrekturausdruc
Page 7 and 8: M_SicherhMax_us.FM Korrekturausdruc
Page 9: M_SicherhMax_us.FM Korrekturausdruc
Page 13 and 14: M_VerwendStd_us.FM Korrekturausdruc
Page 15 and 16: MSB_OpMan_03_us.FM Korrekturausdruc
Page 61 and 62:
MSB_OpMan_07_us.FM Korrekturausdruc
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
M_AnhangStd_us.FM Korrekturausdruck
Page 117 and 118:
M_AnhangStd_us.FM Korrekturausdruck
Page 119 and 120:
MSB_OpManAen_us.FM Korrekturausdruc
Page 121 and 122:
MSB_OperaMan_us0110SIX.fm Korrektur
Page 123 and 124:
ELAU_FoStoerung_us.fm Korrekturausd
show all

SB-Motor - Orbit Motion Technologies

Create successful ePaper yourself

Delete template?

Save as template?