Data Sheet PacDriveâ„¢ iSH Servo Drive System - Orbit Motion ...

Parameter Value
Digital outputs
- Number
- Output voltage
- Rated current per output
- Total module current across all 8 inputs/outputs
- Activation current
- Leakage current 0 signal
- Transmission time
- Short-circuit-proof
- Supply output
- Electrical isolation
Weight 0.22 kg
Ambient conditions
- Protection class
- Ambient temp. during operation
- During storage and transport
- Excess voltage category
- Degree of radio interference
8 (IEC61131-2)
(+UL-3 V) < UOUT < +UL Ie = 500 mA
When using internal I/O supply: 0.1 A
When using external I/O supply: 2.0 A
Iemax > 2 A for 1 s
< 0.4 mA
100 µs
Yes
DC 24 V (-15% / +20%) / 2 A
500 V floating opposite PE
IP 65
+5 to +40°C
-25 to +70°C, temperature variation t max = 30 K/h
Class A EN55011 / EN61800-3
Approval CE, cULus (in preparation)
Table 5-1: Technical data for iSH-DIO8
NOTE
There is no potential isolation among any of the 8 inputs/outputs.
When using an external power supply, you must protect it with 2 A (time-lag).
The control voltage when using external I/O supply can be supplied either via the X4,
X5 outlets or via the DIO-4 M12 distributor.
5.2 Electrical connections
Optional module iSH-DIO8
Pin Designation Meaning
1 IO.0 Input/output 0
2 IO.1 Input/output 1
3 IO.2 Input/output 2
4 IO.3 Input/output 3
5 24 V Control voltage
6 24 V Control voltage
7 0 V Control voltage
8 0 V Control voltage
Shield PE Shield
Table 5-2: Electrical connections for iSH-DIO8 outlet X4 - inputs/outputs
5.2 Electrical connections
ELAU AG Servo Drive System iSH Page 13